CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

文件：567.79 Kbytes 页数：54 Pages

Mitel

Advanced Controller for E1

Microchip

微芯科技

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

文件：567.79 Kbytes 页数：54 Pages

Mitel

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

文件：567.79 Kbytes 页数：54 Pages

Mitel

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

文件：567.79 Kbytes 页数：54 Pages

Mitel

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

文件：567.79 Kbytes 页数：54 Pages

Mitel

CMOS ST-BUS™ FAMILY Advanced Controller for E1

Description\nThe MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements.\nThe MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.\nExten • Meets applicable requirements of CCITT G.704, G.706, G.732, G.775, G.796, I.431 and ETSI ETS 300 011\n• HDB3, RZ, NRZ (fibre interface) and bipolar NRZ line codes\n• Data link access and national bit buffers (five bytes each)\n• Enhanced alarms, performance monitoring and error insertion\n• Maskab;

Mitel