1 Features

• Core

– Arm® 32-bit Cortex®-M0+ CPU with memory

protection unit, frequency up to 80 MHz

• Operating characteristics

– Extended temperature: –40°C up to 105°C

– Wide supply voltage range: 1.62 V to 3.6 V

• Memories

– Up to 128KB of flash memory with built-in error

correction code (ECC)

– Up to 32KB of SRAM with hardware parity

• High-performance analog peripherals

– Two simultaneous sampling 12-bit 4-Msps

analog-to-digital converters (ADCs) with up to

17 external channels

• 14-bit effective resolution at 250-ksps with

hardware averaging

– One general-purpose amplifier (GPAMP)

– Configurable 1.4-V or 2.5-V internal shared

voltage reference (VREF)

– Integrated temperature sensor

– Integrated supply monitor

• Optimized low-power modes

– RUN: 96 μA/MHz (CoreMark)

– SLEEP: 467 μA at 4 MHz

– STOP: 46 μA at 32 kHz

– STANDBY: 1.5 μA with RTC and SRAM

retention

– SHUTDOWN: 80 nA with IO wakeup capability

• Intelligent digital peripherals

– 7-channel DMA controller

– Two 16-bit advanced control timers support

dead band insertion and fault handling

– Seven timers supporting up to 22 PWM

channels

• One 16-bit general purpose timer

• One 16-bit general purpose timer supports

QEI

• Two 16-bit general-purpose timers support

low-power operation in STANDBY mode

• One 32-bit general-purpose timer

• Two 16-bit advanced timers with deadband

– Two window-watchdog timers

– RTC with alarm and calendar mode

• Enhanced communication interfaces

– Four UART interfaces; one supports LIN,

IrDA, DALI, Smart Card, Manchester, and

three support low-power operation in STANDBY

mode

– Two I2C interfaces supporting up to FM+

(1 Mbit/s), SMBus, PMBus, and wakeup from

STOP mode

– Two SPIs, one SPI supports up to 32 Mbits/s

• Clock system

– Internal 4- to 32-MHz oscillator with up to ±3

accuracy (SYSOSC) across temperature

– Phase-locked loop (PLL) up to 80 MHz

– Internal 32-kHz oscillator (LFOSC)

– External 4- to 48-MHz crystal oscillator (HFXT)

– External 32-kHz crystal oscillator(LFXT)

– External clock input

• Data integrity and encryption

– Cyclic redundancy checker (CRC-16, CRC-32)

• Flexible I/O features

– Up to 60 GPIOs

• Two 5-V tolerant IOs

• Two high-drive IOs with 20-mA drive

strength

• Development support

– 2-pin serial wire debug (SWD)

• Package options

– 64-pin LQFP

– 48-pin LQFP , VQFN

– 32-pin VQFN

– 28-pin VSSOP

– 24-pin VQFN

• Family members (also see Device Comparison)

– MSPM0G1105: 32KB flash, 16KB RAM

– MSPM0G1106: 64KB flash, 32KB RAM

– MSPM0G1107: 128KB flash, 32KB RAM

• Development kits and software (also see Tools

and Software)

– LP-MSPM0G3507 LaunchPad™ development

kit

– MSP Software Development Kit (SDK)

2 Applications

• Motor control

• Home appliances

• Uninterruptible power supplies and inverters

• Electronic point of sale systems

• Medical and healthcare

• Test and measurement

• Factory automation and control

• Industrial transport

• Grid infrastructure

• Smart metering

• Communication modules

• Lighting

3 Description

MSPM0G110x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU

family based on the enhanced Arm® Cortex®-M0+ 32-bit core platform operating at up to 80-MHz frequency.

These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature

ranges from -40°C to 105°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.

The MSPM0G110x devices provide up to 128KB embedded flash program memory with built-in error correction

code (ECC) and up to 32KB SRAM with hardware parity option. The devices also incorporate a memory

protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as two 12-bit 4-Msps

ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also

offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with

one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and

one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode.

These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces

(four UART, two I2C, two SPI).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital

integration allowing for customers find the MCU that meets their project's needs. The MSPM0 MCU platform

combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system

designers to increase performance while reducing energy consumption.

MSPM0G110x MCUs are supported by an extensive hardware and software ecosystem with reference designs

and code examples to get the design started quickly. Development kits include a LaunchPad available for

purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of

Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are

also supported by extensive online collateral, training with MSP Academy, and online support through the TI

E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80-MHz Microcontrollers Technical Reference

Manual.