MSP430G2332QPW2EP中文资料德州仪器数据手册PDF规格书

1FEATURES

23• Low Supply Voltage Range: 1.8 V to 3.6 V

• Ultra-Low Power Consumption

– Active Mode: 220 μA at 1 MHz, 2.2 V

– Standby Mode: 0.5 μA

– Off Mode (RAM Retention): 0.1 μA

• Five Power-Saving Modes

• Ultra-Fast Wake-Up From Standby Mode in

Less Than 1 μs

• 16-Bit RISC Architecture, 62.5-ns Instruction

Cycle Time

• Basic Clock Module Configurations

– Internal Frequencies up to 16 MHz With

Four Calibrated Frequencies

– Internal Very-Low-Power Low-Frequency

(LF) Oscillator

– 32-kHz Crystal (1)

– External Digital Clock Source

• One 16-Bit Timer_A With Three

Capture/Compare Registers

• Up to 16 Touch-Sense Enabled I/O Pins

• Universal Serial Interface (USI) Supporting SPI

and I2C (see Table 1)

• 10-Bit 200-ksps Analog-to-Digital (A/D)

Converter With Internal Reference, Sampleand-

Hold, and Autoscan (see Table 1)

• Brownout Detector

• Serial Onboard Programming,

No External Programming Voltage Needed,

Programmable Code Protection by Security

Fuse

• On-Chip Emulation Logic With Spy-Bi-Wire

Interface

• Family Members are Summarized in Table 1

• Package Options

– TSSOP: 20 Pin

• For Complete Module Descriptions, See the

MSP430x2xx Family User’s Guide (SLAU144)

SUPPORTS DEFENSE, AEROSPACE,

AND MEDICAL APPLICATIONS

• Controlled Baseline

• One Assembly and Test Site

• One Fabrication Site

• Available in Extended (–40°C to 125°C)

Temperature Range (2)

• Extended Product Life Cycle

• Extended Product-Change Notification

• Product Traceability

DESCRIPTION

The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consist of several devices featuring

different sets of peripherals targeted for various applications. The architecture, combined with five low-power

modes is optimized to achieve extended battery life in portable measurement applications. The device features a

powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.

The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 μs.

The MSP430G2332 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in

16-bit timers, and up to 16 I/O touch sense enabled pins and built-in communication capability using the

universal serial communication interface. The MSP430G2332 series have a 10-bit A/D converter. For

configuration details, see Table 1. Typical applications include low-cost sensor systems that capture analog

signals, convert them to digital values, and then process the data for display or for transmission to a host system.