MSP430FR59691IRGZT中文资料德州仪器数据手册PDF规格书

1.1 Features 1

(1) RTC is clocked by a 3.7-pF crystal.

• Embedded Microcontroller

– 16-Bit RISC Architecture up to 16‑MHz Clock

– Wide Supply Voltage Range From 3.6 V Down

to 1.8 V (Minimum Supply Voltage is Restricted

by SVS Levels, See the SVS Specifications)

• Optimized Ultra-Low-Power Modes

– Active Mode: Approximately 100 μA/MHz

– Standby (LPM3 With VLO): 0.4 μA (Typical)

– Real-Time Clock (LPM3.5): 0.25 μA (Typical) (1)

– Shutdown (LPM4.5): 0.02 μA (Typical)

• Ultra-Low-Power Ferroelectric RAM (FRAM)

– Up to 64KB of Nonvolatile Memory

– Ultra-Low-Power Writes

– Fast Write at 125 ns Per Word (64KB in 4 ms)

– Unified Memory = Program + Data + Storage in

One Single Space

– 1015 Write Cycle Endurance

– Radiation Resistant and Nonmagnetic

• Intelligent Digital Peripherals

– 32-Bit Hardware Multiplier (MPY)

– 3-Channel Internal DMA

– Real-Time Clock (RTC) With Calendar and

Alarm Functions

– Five 16-Bit Timers With up to Seven

Capture/Compare Registers Each

– 16-Bit Cyclic Redundancy Checker (CRC)

• High-Performance Analog

– 16-Channel Analog Comparator

– 12-Bit Analog-to-Digital Converter (ADC)

With Internal Reference and Sample-and-Hold

and up to 16 External Input Channels

• Multifunction Input/Output Ports

– All Pins Support Capacitive Touch Capability

With No Need for External Components

– Accessible Bit-, Byte-, and Word-Wise (in Pairs)

– Edge-Selectable Wake From LPM on All Ports

– Programmable Pullup and Pulldown on All Ports

• Code Security and Encryption

– 128-Bit or 256-Bit AES Security Encryption and

Decryption Coprocessor

– Random Number Seed for Random Number

Generation Algorithms

• Enhanced Serial Communication

– eUSCI_A0 and eUSCI_A1 Support

– UART With Automatic Baud-Rate Detection

– IrDA Encode and Decode

– SPI

– eUSCI_B0 Supports

– I2C With Multiple Slave Addressing

– SPI

– Hardware UART and I2C Bootloader (BSL)

• Flexible Clock System

– Fixed-Frequency DCO With 10 Selectable

Factory-Trimmed Frequencies

– Low-Power Low-Frequency Internal Clock

Source (VLO)

– 32-kHz Crystals (LFXT)

– High-Frequency Crystals (HFXT)

• Development Tools and Software

– Free Professional Development Environments

With EnergyTrace++™ Technology

– Development Kit (MSP-TS430RGZ48C)

• Family Members

– Device Comparison Summarizes the Available

Device Variants and Package Types

• For Complete Module Descriptions, See the

MSP430FR58xx, MSP430FR59xx, and

MSP430FR6xx Family User's Guide

1.2 Applications

• Metering

• Energy Harvested Sensor Nodes

• Wearable Electronics

• Sensor Management

• Data Logging

1.3 Description

The MSP430™ ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic

ultra-low-power system architecture, allowing innovators to increase performance at lowered energy

budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and

reliability of flash at much lower power.

The MSP430 ULP FRAM portfolio consists of a diverse set of devices featuring FRAM, the ULP 16-bit

MSP430 CPU, and intelligent peripherals targeted for various applications. The ULP architecture

showcases seven low-power modes, optimized to achieve extended battery life in energy-challenged

applications.