MSP430FR5723IRHAT.A中文资料德州仪器数据手册PDF规格书

1.1 Features 1

• Embedded Microcontroller

– 16-Bit RISC Architecture up to 8-MHz Clock

– Wide Supply Voltage Range (2 V to 3.6 V)

– –40°C to 85°C Operation

• Optimized Ultra-Low-Power Modes

– Active Mode: 81.4 μA/MHz (Typical)

– Standby (LPM3 With VLO): 6.3 μA (Typical)

– Real-Time Clock (RTC) (LPM3.5 With Crystal):

1.5 μA (Typical)

– Shutdown (LPM4.5): 0.32 μA (Typical)

• Ultra-Low-Power Ferroelectric RAM (FRAM)

– Up to 16KB of Nonvolatile Memory

– Ultra-Low-Power Writes

– Fast Write at 125 ns per Word (16KB in 1 ms)

– Built-In Error Correction Coding (ECC) and

Memory Protection Unit (MPU)

– Universal Memory = Program + Data + Storage

– 1015 Write Cycle Endurance

– Radiation Resistant and Nonmagnetic

• Intelligent Digital Peripherals

– 32-Bit Hardware Multiplier (MPY)

– Three-Channel Internal DMA

– Real-Time Clock (RTC) With Calendar and

Alarm Functions

– Five 16-Bit Timers With up to Three

Capture/Compare Registers

– 16-Bit Cyclic Redundancy Checker (CRC)

• High-Performance Analog

– 16-Channel Analog Comparator With Voltage

Reference and Programmable Hysteresis

– 12-Channel 10-Bit Analog-to-Digital Converter

(ADC) With Internal Reference and Sample-and-

Hold

– 200 ksps at 100-μA Consumption

• Enhanced Serial Communication

– eUSCI_A0 and eUSCI_A1 Support:

– UART With Automatic Baud-Rate Detection

– IrDA Encode and Decode

– SPI

– eUSCI_B0 Supports:

– I2C With Multiple-Slave Addressing

– SPI

– Hardware UART Bootloader (BSL)

• Power Management System

– Fully Integrated LDO

– Supply Voltage Supervisor for Core and Supply

Voltages With Reset Capability

– Always-On Zero-Power Brownout Detection

– Serial Onboard Programming With No External

Voltage Needed

• Flexible Clock System

– Fixed-Frequency DCO With Six Selectable

Factory-Trimmed Frequencies (Device

Dependent)

– Low-Power Low-Frequency Internal Clock

Source (VLO)

– 32-kHz Crystals (LFXT)

– High-Frequency Crystals (HFXT)

• Development Tools and Software

– Free Professional Development Environment

(Code Composer Studio™ IDE)

– Low-Cost Full-Featured Kit

(MSP-EXP430FR5739)

– Full Development Kit (MSP-FET430U40A)

– Target Board (MSP-TS430RHA40A)

• Family Members

– See Family Members for Available Device

Variants and Packages

– For Complete Module Descriptions, See the

MSP430FR57xx Family User's Guide

1.2 Applications

• Home Automation

• Security

• Sensor Management

• Data Acquisition

1.3 Description

The TI MSP430FR572x family of ultra-low-power microcontrollers consists of multiple devices that feature

embedded FRAM nonvolatile memory, ultra-low-power 16-bit MSP430™ CPU, and different peripherals

targeted for various applications. The architecture, FRAM, and peripherals, combined with seven lowpower

modes, are optimized to achieve extended battery life in portable and wireless sensing applications.

FRAM is a new nonvolatile memory that combines the speed, flexibility, and endurance of SRAM with the

stability and reliability of flash, all at lower total power consumption. Peripherals include a 10-bit ADC, a

16-channel comparator with voltage reference generation and hysteresis capabilities, three enhanced

serial channels capable of I2C, SPI, or UART protocols, an internal DMA, a hardware multiplier, an RTC,

five 16-bit timers, and digital I/Os.