MSP430F5508IZXH.B中文资料德州仪器数据手册PDF规格书

1.1 Features 1

• Low supply-voltage range:

3.6 V down to 1.8 V

• Ultra-low power consumption

– Active mode (AM)

All system clocks active

– 195 μA/MHz at 8 MHz, 3 V, flash program

execution (typical)

– 115 μA/MHz at 8 MHz, 3 V, RAM program

execution (typical)

– Standby mode (LPM3)

– Real-time clock (RTC) with crystal, watchdog,

and supply supervisor operational, full RAM

retention, fast wakeup:

1.9 μA at 2.2 V, 2.1 μA at 3 V (typical)

– Low-power oscillator (VLO), general-purpose

counter, watchdog, and supply supervisor

operational, full RAM retention, fast wakeup:

1.4 μA at 3 V (typical)

– Off mode (LPM4)

Full RAM retention, supply supervisor

operational, fast wakeup:

1.1 μA at 3 V (typical)

– Shutdown mode (LPM4.5)

0.18 μA at 3 V (typical)

• Wake up from standby in less than 5 μs

• 16-bit RISC architecture, extended memory, up to

25-MHz system clock

• Flexible power-management system

– Fully integrated LDO with programmable

regulated core supply voltage

– Supply voltage supervision, monitoring, and

brownout

• Unified clock system

– FLL control loop for frequency stabilization

– Low-power low-frequency internal clock source

(VLO)

– Low-frequency trimmed internal reference

source (REFO)

– 32-kHz watch crystals (XT1)

– High-frequency crystals up to 32 MHz (XT2)

• 16-bit Timer TA0, Timer_A with five

capture/compare registers

• 16-bit Timer TA1, Timer_A with three

capture/compare registers

• 16-bit Timer TA2, Timer_A with three

capture/compare registers

• 16-bit Timer TB0, Timer_B with seven

capture/compare shadow registers

• Two universal serial communication interfaces

(USCIs)

– USCI_A0 and USCI_A1 each support:

– Enhanced UART with automatic baud-rate

detection

– IrDA encoder and decoder

– Synchronous SPI

– USCI_B0 and USCI_B1 each support:

– I2C

– Synchronous SPI

• Full-speed universal serial bus (USB)

– Integrated USB-PHY

– Integrated 3.3-V and 1.8-V USB power system

– Integrated USB-PLL

– Eight input and eight output endpoints

• 10-bit analog-to-digital converter (ADC) with

window comparator

• Comparator

• Hardware multiplier supports 32-bit operations

• Serial onboard programming, no external

programming voltage needed

• Three-channel internal DMA

• Basic timer with RTC feature

• Device Comparison summarizes the available

family members

1.2 Applications

• Analog and digital sensor systems

• Data loggers

• Connectivity to USB hosts

• Wireless headsets

1.3 Description

The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets

of peripherals targeted for various applications. The architecture, combined with extensive low-power

modes, is optimized to achieve extended battery life in portable measurement applications. The device

features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to

maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from lowpower

modes to active mode in less than 5 μs.

The MSP430F5510, MSP430F5509, and MSP430F5508 devices are microcontroller configurations with

integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 10-bit ADC, two

USCIs (1), a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 or 47 I/O pins.

The MSP430F5507, MSP430F5506, MSP430F5505, and MSP430F5504 devices are microcontroller

configurations with integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance

10-bit ADC, one USCI, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 I/O

pins.

The MSP430F5503, MSP430F5502, MSP430F5501, and MSP430F5500 devices include all of the

MSP430F5507, MSP430F5506, MSP430F5505, and MSP430F5504 peripherals, except that they have a

comparator instead of the 10-bit ADC.

Typical applications include analog and digital sensor systems and data loggers that require connectivity

to various USB hosts.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User's Guide.