MSP430F5328IZXHR.A中文资料德州仪器数据手册PDF规格书

1 Features

• Low supply voltage range:

3.6 V down to 1.8 V

• Ultra-low power consumption

– Active mode (AM):

all system clocks active

290 μA/MHz at 8 MHz, 3 V, flash program

execution (typical)

150 μA/MHz at 8 MHz, 3 V, RAM program

execution (typical)

– Standby mode (LPM3):

real-time clock (RTC) with crystal, watchdog,

and supply supervisor operational, full RAM

retention, fast wakeup:

1.9 μA at 2.2 V, 2.1 μA at 3 V (typical)

low-power oscillator (VLO), general-purpose

counter, watchdog, and supply supervisor

operational, full RAM retention, fast wakeup:

1.4 μA at 3 V (typical)

– Off mode (LPM4):

full RAM retention, supply supervisor

operational, fast wakeup:

1.1 μA at 3 V (typical)

– Shutdown mode (LPM4.5):

0.18 μA at 3 V (typical)

• Wake up from standby mode in 3.5 μs (typical)

• 16-bit RISC architecture, extended memory, up to

25-MHz system clock

• Flexible power-management system

– Fully integrated LDO with programmable

regulated core supply voltage

– Supply voltage supervision, monitoring, and

brownout

• Unified clock system

– FLL control loop for frequency stabilization

– Low-power low-frequency internal clock source

(VLO)

– Low-frequency trimmed internal reference

source (REFO)

– 32-kHz watch crystals (XT1)

– High-frequency crystals up to 32 MHz (XT2)

• 16-bit timer TA0, Timer_A with five capture/

compare registers

• 16-bit timer TA1, Timer_A with three capture/

compare registers

• 16-bit timer TA2, Timer_A with three capture/

compare registers

• 16-bit timer TB0, Timer_B with seven capture/

compare shadow registers

• Two universal serial communication interfaces

(USCIs)

– USCI_A0 and USCI_A1 each support:

• Enhanced UART supports automatic baudrate

detection

• IrDA encoder and decoder

• Synchronous SPI

– USCI_B0 and USCI_B1 each support:

• I2C

• Synchronous SPI

• Integrated 3.3-V power system

• 12-bit analog-to-digital converter (ADC) with

internal reference, sample-and-hold, and autoscan

feature

• Comparator

• Hardware multiplier supports 32-bit operations

• Serial onboard programming, no external

programming voltage needed

• 3-channel internal DMA

• Basic timer with RTC feature

• Device Comparison summarizes the available

family members

2 Applications

• Analog and Digital Sensor Systems

• Data Loggers

• General-Purpose Applications

3 Description

The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of

peripherals targeted for various applications. The architecture, combined with extensive low-power modes is

optimized to achieve extended battery life in portable measurement applications. The device features a powerful

16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The

digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in

3.5 μs (typical).

The MSP430F5329, MSP430F5327, and MSP430F5325 are microcontroller configurations with an integrated

3.3-V LDO, four 16-bit timers, a high-performance 12-bit ADC, two USCIs, a hardware multiplier, DMA, an RTC

module with alarm capabilities, and 63 I/O pins.

The MSP430F5328, MSP430F5326, and MSP430F5324 include all of these peripherals but have 47 I/O pins.

Typical applications include analog and digital sensor systems, data loggers, and various general-purpose

applications.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User's Guide.