MSP430F5308中文资料德州仪器数据手册PDF规格书

1.1 Features 1

• Low supply-voltage range:

3.6 V down to 1.8 V

• Ultra-low power consumption

– Active mode (AM)

All system clocks active

– 195 μA/MHz (typical) at 8 MHz, 3 V, flash

program execution

– 115 μA/MHz (typical) at 8 MHz, 3 V, RAM

program execution

– Standby mode (LPM3)

– Real-time clock (RTC) with crystal, watchdog,

and supply supervisor operational, full RAM

retention, fast wakeup:

1.9 μA (typical) at 2.2 V,

2.1 μA (typical) at 3 V

– Low-power oscillator (VLO), general-purpose

counter, watchdog, and supply supervisor

operational, full RAM retention, fast wakeup:

1.4 μA (Typical) at 3 V

– Off mode (LPM4)

Full RAM retention, supply supervisor

operational, fast wakeup:

1.1 μA at 3 V (typical)

– Shutdown mode (LPM4.5)

0.18 μA at 3 V (typical)

• Wake up from standby mode in less than 5 μs

• 16-bit RISC architecture, extended memory, up to

25-MHz system clock

• Flexible power-management system

– Fully integrated LDO with programmable

regulated core supply voltage

– Supply voltage supervision, monitoring, and

brownout

• Unified clock system (UCS)

– FLL control loop for frequency stabilization

– Low-power low-frequency internal clock source

(VLO)

– Low-frequency trimmed internal reference

source (REFO)

– 32-kHz watch crystals (XT1)

– High-frequency crystals up to 32 MHz (XT2)

• 16-bit Timer TA0, Timer_A with five

capture/compare registers

• 16-bit Timer TA1, Timer_A with three

capture/compare registers

• 16-bit Timer TA2, Timer_A with three

capture/compare registers

• 16-bit Timer TB0, Timer_B with seven

capture/compare shadow registers

• Two universal serial communication interfaces

(USCIs)

– USCI_A0 and USCI_A1

– Enhanced UART supports automatic baudrate

detection

– IrDA encoder and decoder

– Synchronous SPI

– USCI_B0 and USCI_B1

– I2C

– Synchronous SPI

• Integrated 3.3-V power system

• 10-bit analog-to-digital converter (ADC) with

window comparator

• Comparator

• Hardware multiplier supports 32-bit operations

• Serial onboard programming, no external

programming voltage needed

• 3-channel internal DMA

• Basic timer with RTC feature

• Device Comparison summarizes the available

family members

1.2 Applications

• Analog and digital sensor systems

• Digital motor control

• Remote controls

• Thermostats

• Digital timers

• Hand-held meters

1.3 Description

The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets

of peripherals targeted for various applications. The architecture, combined with five low-power modes, is

optimized to achieve extended battery life in portable measurement applications. The device features a

powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code

efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to

active mode in less than 5 μs.

The MSP430F5310, MSP430F5309, and MSP430F5308 devices are microcontroller configurations with a

3.3-V LDO, four 16-bit timers, a high-performance 10-bit ADC, two USCIs (1), a hardware multiplier, DMA,

an RTC module with alarm capabilities, and 31 or 47 I/O pins.

The MSP430F5304 device is a configuration with a 3.3-V LDO, four 16-bit timers, a high-performance 10-

bit ADC, one USCI, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 I/O pins.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User's Guide.