MPX5010G

Integrated Pressure Sensor; \n\n •5.0% Maximum Error over 0° to 85°C\n\n \n\n •Ideally Suited for Microprocessor or\n\n Microcontroller–Based Systems\n\n \n\n •Durable Epoxy Unibody, Low Profile, and Small Outline Package\n\n Options\n\n \n\n •Temperature Compensated over 40° to +125°C\n\n \n\n •Patented Silicon Shear Stress Strain Gauge\n\n \n\n •Available in Differential and Gauge Configurations\n\n;

Overview The MPX5010/MPXL5010/MPXV5010 series piezoresistive transducers are state–of–the–art monolithic silicon pressure sensors designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This transducer combines advanced micromachining techniques, thin–film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

恩XP

MPX5010GP

INTEGRATED PRESSURE SENSOR 0 to 10 kPa (0 to 1.45 psi) 0.2 to 4.7 V OUTPUT

IntegratedSiliconPressureSensorOn-ChipSignalConditioned,TemperatureCompensatedandCalibrated TheMPX5010seriespiezoresistivetransducerisastate–of–the–artmonolithicsiliconpressuresensordesignedforawiderangeofapplications,butparticularlythoseemployingamicrocontro

MPX5010GP

Sensor

QualityandReliability—Overview AMajorObjectiveoftheProductionCycleFromrigidincominginspectionofpiecepartsandmaterials,tostringentoutgoingqualityverification,theMotorolaassemblyandprocessflowisencompassedbyanelaboratesystemoftestandinspectionstations;station

MPX5010GP

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated

TheMPxx5010seriespiezoresistivetransducersarestate-of-the-artmonolithicsiliconpressuresensorsdesignedforawiderangeofapplications,butparticularlythoseemployingamicrocontrollerormicroprocessorwithA/Dinputs.Thistransducercombinesadvancedmicromachiningtechniques,thin

MPX5010GP

Integrated silicon pressure sensor on-chip signal conditioned, temperature compensated and calibrated

1Generaldescription TheMPxx5010seriespiezoresistivetransducersarestate-of-the-artmonolithicsiliconpressuresensors designedforawiderangeofapplications,butparticularlythoseemployingamicrocontrollerormicroprocessor withA/Dinputs.Thistransducercombinesadvancedmicrom

ETC

MPX5010GS

INTEGRATED PRESSURE SENSOR 0 to 10 kPa (0 to 1.45 psi) 0.2 to 4.7 V OUTPUT

IntegratedSiliconPressureSensorOn-ChipSignalConditioned,TemperatureCompensatedandCalibrated TheMPX5010seriespiezoresistivetransducerisastate–of–the–artmonolithicsiliconpressuresensordesignedforawiderangeofapplications,butparticularlythoseemployingamicrocontro

MPX5010GS

Sensor

QualityandReliability—Overview AMajorObjectiveoftheProductionCycleFromrigidincominginspectionofpiecepartsandmaterials,tostringentoutgoingqualityverification,theMotorolaassemblyandprocessflowisencompassedbyanelaboratesystemoftestandinspectionstations;station

MPX5010GS

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated

TheMPxx5010seriespiezoresistivetransducersarestate-of-the-artmonolithicsiliconpressuresensorsdesignedforawiderangeofapplications,butparticularlythoseemployingamicrocontrollerormicroprocessorwithA/Dinputs.Thistransducercombinesadvancedmicromachiningtechniques,thin

MPX5010GS

Pressure Sensor, 5V, 0/10kPa, Port; • 5.0 percent maximum error over 0° to 85°C\n• Ideally suited for microprocessor or microcontroller-based systems\n• Durable epoxy unibody and thermoplastic (PPS) surface mount package\n• Temperature compensated over -40°C to +125°C\n• Patented silicon shear stress strain gauge\n• Available in differential and gauge configurations\n• Available in surface mount (SMT) or through-hole (DIP) configurations\n;

The NXP® MPX5010/MPXV5010G/MP3V5010 series of piezoresistive transducers are state-of-the-art monolithic silicon pressure sensors designed for a wide range of applications, particularly those employing a MCU or MPU with A/D inputs. This transducer combines advanced micromachining techniques, thin-film metallization and bipolar processing to provide an accurate high-level analog output signal that is proportional to applied pressure.\n

恩XP

MPX5010GSX

PRES SEN INTEG 10KPA; • 5.0 percent maximum error over 0° to 85°C\n• Ideally suited for microprocessor or microcontroller-based systems\n• Durable epoxy unibody and thermoplastic (PPS) surface mount package\n• Temperature compensated over -40°C to +125°C\n• Patented silicon shear stress strain gauge\n• Available in differential and gauge configurations\n• Available in surface mount (SMT) or through-hole (DIP) configurations\n;

The NXP® MPX5010/MPXV5010G/MP3V5010 series of piezoresistive transducers are state-of-the-art monolithic silicon pressure sensors designed for a wide range of applications, particularly those employing a MCU or MPU with A/D inputs. This transducer combines advanced micromachining techniques, thin-film metallization and bipolar processing to provide an accurate high-level analog output signal that is proportional to applied pressure.\n

恩XP