MPQ6610GS-AEC1集成电路（IC）的电机驱动器控制器规格书PDF中文资料

MPQ6610GS-AEC1属于集成电路（IC）的电机驱动器控制器。由美国芯源系统有限公司制造生产的MPQ6610GS-AEC1电机驱动器，控制器产品属于电机驱动器和控制器电源管理集成电路 (PMIC) 系列，可用于控制或操作从某电源施加到电机或相关机电执行器的电源。所实现的具体功能和特性集根据预期负载和预期应用的特性有很大差异，范围从用于有刷电机的简单开环速度控制到基于步进电机的高级闭环运动控制。

DESCRIPTION

The MPQ6610 is a half-bridge driver with

current measurement and regulation features. It

can operate from a 4V to 55V supply voltage,

and can deliver up to 3A of output current

(depending on the package, PCB design, and

ambient temperature). The MPQ6610 can be

used to drive brushed DC motors, solenoids, or

other loads.

An internal current-sense circuit provides an

output with a voltage that is proportional to the

load current. Cycle-by-cycle current regulation

and limiting are also provided. These features

do not require the use of a low-Ohmic shunt

resistor.

Internal diagnostic and protection features

include open-load detection, over-current

protection (OCP), under-voltage lockout

(UVLO), and thermal shutdown.

The MPQ6610 is available in 8-pin TSOT23

and SOIC-8 packages. Note that due to the

small pin spacing, the TSOT23 package is only

recommended for applications up to 45V,

unless conformal coating or encapsulation is

used.

FEATURES

 Wide 4V to 55V Input Voltage Range

 3A Maximum Output Current

 Internal Half-Bridge Driver

 Cycle-by-Cycle Current Regulation/Limiting

 Low On Resistance (High Side: 100mΩ,

Low Side: 120mΩ)

 No Control Power Supply Required

 Simple, Versatile Logic Interfaces

 Inputs Compatible with 2.5V, 3.3V, and 5V

Logic

 Over-Current Protection (OCP)

 Open-Load Detection

 Thermal Shutdown

 Under-Voltage Lockout (UVLO)

 Fault Indication Output

 Thermally Enhanced Package

 Available in TSOT23 and SOIC-8 Packages

 Available in AEC-Q100 Grade 1

APPLICATIONS

 Solenoid Drivers

 Relay Drivers

 Brushed DC Motor Drivers