MPL3150A2ST1中文资料恩智浦数据手册PDF规格书

1 General description

The MPL3150A2S is a compact, piezoresistive, absolute pressure sensor with an I2C digital interface.

MPL3150A2S has a wide operating range of 50 kPa to 150 kPa. The MEMS is temperature compensated

utilizing an on-chip temperature sensor. The pressure and temperature data is fed into a high-resolution ADC

to provide fully compensated and digitized outputs for pressure in Pascals and temperature in °C. The internal

processing in MPL3150A2S removes compensation and unit conversion load from the system MCU, simplifying

system design.

MPL3150A2S's advanced ASIC has multiple user programmable modes such as power saving, interrupt and

autonomous data acquisition modes, including programmed acquisition cycle timing, and poll-only modes.

Typical active supply current is 40 μA per measurement-second and is offered in a 5 mm x 3 mm x 1.1 mm LGA

RoHS compliant package.

2 Features and benefits

• Operating range: 50 kPa to 150 kPa absolute pressure

• Calibrated range: 70 kPa to 150 kPa absolute pressure

• Calibrated temperature output: −40 °C to 85 °C

• I2C digital output interface

• Fully compensated internally

• Direct reading

– Pressure: 20-bit measurement (Pascals)

– 50 kPa to 150 kPa

– Temperature: 12-bit measurement (°C)

– –40 °C to 85 °C

• Programmable interrupts

• Autonomous data acquisition

– Embedded 32-sample FIFO

– Data logging up to 12 days using the FIFO

– One-second to nine-hour data acquisition rate

• 1.95 V to 3.6 V supply voltage, internally regulated

• 1.6 V to 3.6 V digital interface supply voltage

• Operating temperature from −40 °C to +85 °C

3 Applications

• High-accuracy barometry

• Smartphones, tablets, and wearable devices

• GPS applications: dead reckoning, map assist, navigation, enhancement for emergency services

• Weather station equipment