PowerQUICC II Pro Processor

Overview The MPC8309 incorporates the e300c3 (MPC603e-based) core built on Power Architecture® technology, which includes 16 KB of each L1 instruction and data caches, dual integer units, and on-chip memory management units (MMUs). The MPC8309 also includes a 32-bit PCI controller, two DMA engine

文件：311.65 Kbytes 页数：2 Pages

freescaleFreescale Semiconductor, Inc

飞思卡尔飞思卡尔半导体

PowerQUICC II Pro Processors

文件：374.61 Kbytes 页数：2 Pages

freescaleFreescale Semiconductor, Inc

飞思卡尔飞思卡尔半导体

PowerQUICC II Pro Integrated Communications Processor Family Hardware Specifications

文件：471.12 Kbytes 页数：82 Pages

freescaleFreescale Semiconductor, Inc

飞思卡尔飞思卡尔半导体

PowerQUICC, Power Arch SoC, 333MHz, DDR2 w/ECC, PCI, HDLC, TDM, Enet, USB, CAN, -40 to 105C, Rev 1.1

The MPC8309 PowerQUICC® II Pro is a member of the MPC830x family of cost-effective network communication processors that meet the requirements of multi-protocol control applications. It provides better CPU performance, additional functionality and faster interfaces than current PowerQUICC II process • e300 core running up to 417 MHz, DDR2 @ 266 MHz\n• QUICC Engine® running up to 200 MHz\n• 2 x HDLC/TDM\n• 3 x 10/100 or 2 x 10/100 w/IEEE1588v2\n• USB 2.0\n• eSDHC (boot from eSDHC support)\n• 4 x CAN\n• 4 x UART\n• 32-bit PCI Interface\n• Local bus (boot from NOR/NAND flash memory support)\n• 1.0;

恩XP

PowerQUICC, Power Arch SoC, 400MHz, DDR2 w/ECC, PCI, HDLC, TDM, Enet, USB, CAN, -40 to 105C, Rev 1.1

The MPC8309 PowerQUICC® II Pro is a member of the MPC830x family of cost-effective network communication processors that meet the requirements of multi-protocol control applications. It provides better CPU performance, additional functionality and faster interfaces than current PowerQUICC II process • e300 core running up to 417 MHz, DDR2 @ 266 MHz\n• QUICC Engine® running up to 200 MHz\n• 2 x HDLC/TDM\n• 3 x 10/100 or 2 x 10/100 w/IEEE1588v2\n• USB 2.0\n• eSDHC (boot from eSDHC support)\n• 4 x CAN\n• 4 x UART\n• 32-bit PCI Interface\n• Local bus (boot from NOR/NAND flash memory support)\n• 1.0;

恩XP

PowerQUICC, Power Arch SoC, 417MHz, DDR2 w/ECC, PCI, HDLC, TDM, Enet, USB, CAN, -40 to 105C, Rev 1.1

The MPC8309 PowerQUICC® II Pro is a member of the MPC830x family of cost-effective network communication processors that meet the requirements of multi-protocol control applications. It provides better CPU performance, additional functionality and faster interfaces than current PowerQUICC II process • e300 core running up to 417 MHz, DDR2 @ 266 MHz\n• QUICC Engine® running up to 200 MHz\n• 2 x HDLC/TDM\n• 3 x 10/100 or 2 x 10/100 w/IEEE1588v2\n• USB 2.0\n• eSDHC (boot from eSDHC support)\n• 4 x CAN\n• 4 x UART\n• 32-bit PCI Interface\n• Local bus (boot from NOR/NAND flash memory support)\n• 1.0;

恩XP