MP8792中文资料16V, 12A, Synchronous Step-Down Converter with Adjustable Current Limit, Configurable Frequency, and Voltage Tracking数据手册MPS规格书

描述 Description

The MP8792 is a fully integrated, high-frequency, synchronous buck converter. It offers a compact solution that can achieve up to 12A of output current (IOUT) across a wide input voltage (VIN) supply range with excellent load and line regulation. The MP8792 operates at a high efficiency across the IOUT load range.

The MP8792 adopts internally compensated constant-on-time (COT) control to provide fast transient response and ease loop stabilization. The switching frequency (fSW) can be set to 600kHz, 800kHz, or 1000kHz by configuring the MODE pin, which allows the frequency to remain constant regardless of VIN or the output voltage (VOUT).

The VOUT start-up ramp is controlled by an internal timer (1ms), which can be increased by adding a capacitor to the TRK/REF pin. An open-drain power good (PG) signal indicates whether the output is within its nominal voltage range. If the input supply fails to power the MP8792, then the PGOOD pin is clamped to about 0.7V via an external pull-up voltage.

Fully integrated protection features include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and over-temperature protection (OTP). The MP8792 requires a minimal number of readily available, standard external components, and is available in a QFN-21 (3mmx4mm) package.

特性 Features

• Wide Input Voltage (VIN) Range from 2.7V
• 2.7V to 16V with External 3.3V VCC Bias
• 4V to 16V with Internal VCC Bias or External 3.3V VCC Bias

• Differential Output Voltage (VOUT) Remote Sense
• Configurable Accurate Current Limit (ILIMIT) Level
• 12A Output Current (IOUT)
• Low RDS(ON), Integrated Power MOSFETs
• Proprietary Switching Loss Reduction Technique
• Adaptive Constant-On-Time (COT) Control for Fast Transient Response
• Stable with Zero-ESR Output Capacitor
• 0.5% Reference Voltage (VREF) across a 0°C to 70°C Junction Temperature (TJ) Range
• 1% VREF across a -40°C to +125°C TJ Range
• Selectable Pulse-Skip Mode (PSM) or Forced Continuous Conduction Mode (FCCM)
• Excellent Load Regulation
• VOUT Tracking
• VOUT Discharge
• PGOOD Active Clamped at Low Level during Power Failure
• Configurable Soft-Start Time (tSS) from 1ms
• Pre-Biased Start-Up
• 600kHz, 800kHz, or 1000kHz Selectable Switching Frequency (fSW)
• Non-Latch OCP, UVP, OVP, UVLO, and Thermal Shutdown
• Output Adjustable from 0.6V to 90% of VIN, Up to 5.5V Max
• Available in a QFN-21 (3mmx4mm) Package
• Optimized Performance with MPS MPL-AY1265 Inductor Series