4-Channel, Low-Side Driver with I2C Interface

DESCRIPTION The MP6605C is a 4-channel, low-side driver IC with an I2C interface. The device integrates lowside MOSFET (LS-FET) switches and high-side clamp diodes to drive inductive loads. It is typically used for unipolar stepper motors and solenoid drivers. The MP6605C operates from a su

文件：671.73 Kbytes 页数：16 Pages

MPSIND

美国芯源

丝印：M6605C；Package：QFN-24；4-Channel, Low-Side Driver with I2C Interface

DESCRIPTION The MP6605C is a 4-channel, low-side driver IC with an I2C interface. The device integrates lowside MOSFET (LS-FET) switches and high-side clamp diodes to drive inductive loads. It is typically used for unipolar stepper motors and solenoid drivers. The MP6605C operates from a su

文件：671.73 Kbytes 页数：16 Pages

MPSIND

美国芯源

60V, 8-Channel Low-Side Driver with Serial Interface and Fault Indication

DESCRIPTION The MP6606 is an 8-channel low-side driver IC with a serial interface. The device integrates low-side MOSFET (LS-FET) switches and highside clamp diodes to drive inductive loads, which makes it well-suited for unipolar stepper motor and solenoid drives. The MP6606 operates from

文件：565.85 Kbytes 页数：16 Pages

MPS

美国芯源

60V, 8-Channel Low-Side Driver with Serial Interface and Fault Indication

DESCRIPTION The MP6606 is an 8-channel low-side driver IC with a serial interface. The device integrates low-side MOSFET (LS-FET) switches and highside clamp diodes to drive inductive loads, which makes it well-suited for unipolar stepper motor and solenoid drives. The MP6606 operates from

文件：565.85 Kbytes 页数：16 Pages

MPS

美国芯源

35V, 1.5A, Stepper Motor Driver

文件：979.22 Kbytes 页数：18 Pages

MPS

美国芯源

35V, 1.5A, Stepper Motor Driver

文件：979.22 Kbytes 页数：18 Pages

MPS

美国芯源

35V, 2.5A, Stepper Motor Driver

文件：414.62 Kbytes 页数：14 Pages

MPS

美国芯源

35V, 2.5A, Stepper Motor Driver

文件：414.62 Kbytes 页数：14 Pages

MPS

美国芯源

35V, 2.5A, Stepper Motor Driver

文件：414.62 Kbytes 页数：14 Pages

MPS

美国芯源

35V, 1.5A Stepper Motor Driver with Internal Current Sense and Latch-off

The MP6600L is a stepper motor driver with current regulation and a built-in translator.\n\n Current sensing is internal and does not require external sense resistors. With high integration and small package size, the MP6600L is a space-saving, cost-effective solution for bipolar stepper motor • Wide 4.5V to 35V Input Voltage Range\n• Two Internal Full-Bridge Drivers\n• Internal Current Sensing and Regulation\n• Low On Resistance (195m? HS-FET, 170m? LS-FET)\n• No Control Power Supply Required\n• Simple Logic Interface\n• 3.3V and 5V Compatible Logic Supply\n• Step Modes from Full Step to;

MPS

美国芯源