MP6500A中文资料35V，2.5A 步进电机驱动器数据手册MPS规格书

描述 Description

The MP6500A is a stepper motor driver with a built-in translator and current regulation.  Current sensing is internal and requires no external sense resistors. High integration and a small package size make the MP6500A a space-saving and cost-effective solution for bipolar stepper motor drives.

The MP6500A operates from a supply voltage of up to 35V, and can deliver motor currents up to 2.5A (depending on PCB design and thermal conditions). The MP6500A can operate a bipolar stepper motor in full-, half-, quarter-, or eighth-step modes. Internal safety features include over-current protection (OCP), input over-voltage protection (OVP), under-voltage lockout (UVLO), and thermal shutdown.

The MP6500A is identical to the MP6500, except the current setting is accomplished with a voltage input instead of a resistor to ground.

The MP6500A is available in QFN-24 (5mmx5mm) and TSSOP-28EP packages.

特性 Features

• Wide 4.5V to 35V Input Voltage Range
• Two Internal Full-Bridge Drivers
• Internal Current Sensing and Regulation
• Low On Resistance (HS: 195mΩ, LS: 170mΩ)
• No Control Power Supply Required
• Simple Logic Interface
• 3.3V and 5V Compatible Logic Supply
• Step Modes from Full-Step to Eighth-Step
• 2.5A Output Current
• Automatic Current Decay
• Over-Current Protection (OCP)
• Input Over-Voltage Protection (OVP)
• Thermal Shutdown and Under-Voltage Lockout (UVLO) Protection
• Fault Indication Output
• Available in QFN-24 (5mmx5mm) and Thermally Enhanced TSSOP-28EP Packages