MP5098GDT-Z中文资料美国芯源数据手册PDF规格书

DESCRIPTION

The MP5098 is a 12V/5V, low quiescent current

(IQ), low on resistance (RDS(ON)), dual-channel efuse

protection device with current monitoring. It

protects output circuitry from input transients,

as well as protects input circuitry from output

shorts and transients.

At start-up, the inrush current is limited by

limiting the output slew rate. The slew rate is

controlled via the SS pin capacitor (CSS).

The maximum load current (ILOAD_MAX) at the

output is current-limited. The magnitude of the

current limit (ILIMIIT) is fixed internally.

Full protection features include output overvoltage

protection (OVP), over-current

protection (OCP), short-circuit protection (SCP),

and thermal shutdown.

The output voltage (VOUT) is limited by output

OVP. Each rail’s output current (IOUT) can be

monitored via a resistor connected between the

IMON1 and IMON2 pins.

The MP5098 is available in a space-saving

TQFN-10 (2mmx3mm) package.

FEATURES

• 12V/5V Integrated Dual E-Fuse

• Dual-Channel Current Limiting

• 24V/100ms Maximum Surge Input Voltage

(VIN) Tolerance for 12V Bus and 5V Bus

• 40mΩ Low On Resistance (RDS(ON))

• Low Quiescent Current (IQ):

o 210μA IQ for 12V Bus

o 190μA IQ for 15V Bus

• Configurable Soft-Start Time (tSS)

• Fixed Trip/Hold Current Limit (ILIMIIT):

o Fixed 4A Trip ILIMIIT for 12V Bus

o Fixed 2.5A Hold ILIMIIT for 12V Bus

o Fixed 3A Trip ILIMIIT for 5V Bus

o Fixed 1.3A Hold ILIMIIT for 5V Bus

• 15V Over-Voltage Protection (OVP)

Threshold for 12V VIN Channel

• 5.7V OVP Threshold for 5V VIN Channel

• Over-Current Protection (OCP) with Hiccup

Mode

• Short-Circuit Protection (SCP)

• Thermal Shutdown (Latch-Off Protection)

• Available in a TQFN-10 (2mmx3mm)

Package

APPLICATIONS

• Hard-Disk Drives (HDDs)

• Solid-State Drives (SSDs)

• Hot Swap Applications