MMCX-LR-SMT连接器互连器件的同轴连接器（RF）组件规格书PDF中文资料

MMCX-LR-SMT属于连接器互连器件的同轴连接器（RF）组件。由日本广濑电机株式会社制造生产的MMCX-LR-SMT同轴连接器（RF）组件同轴电缆的里层导体由绝缘材料包裹，外层则包裹另一层环形导体和绝缘材料。同轴连接器系列产品是与这类电缆材料配合使用的互连器件，旨在保持特征阻抗在整根电缆上的一致性，以便用作高频信号的传输线。

■Features

1. Snap-on coupling mechanism makes it easy to engage and disengage.

The rugged snap-on interface which uses no slotting in the outer conductor maintains mechanical stability by allowing constant mating force and rotation without degradation of electrical performance.

2. Low Profile accommodates PCMCIA type 2cards

The MMCX-LR-SMT with a height of only 3.51mm can be mounted on the bottom of the type 2card. For installation on the PCB surface, the connector has a 0.36mm offset from the card centerline, which allows the card center axis to coincide with the connector center axis.

3. Designed for ultra thin cable

Industry Standard RG-type coaxial cable

···RG-178B/U (Ø1.8)

···RG-316/U (Ø2.59 max.)

Ø1.48 single shielded cable (one of the smallest available)

···DFSS111-U1979 (Ø1.48) made by Junkosha Inc.

···CO-6F·FH-SB (Ø1.48) made by Hitachi Cable Ltd.

···RF-MF507 (Ø1.48) made by Nissei Electric Co., Ltd.

4. Cable Assemblies with multiple design options

By using Ø1.48 single shielded cable, the opposite end of the assembly can be connected with N, BNC, HRM (SMA type), TNCand H.FL series.

5. Matched Excellent Impedance

The interface is slotless to minimize RF leakage. High frequency characteristics achieve a maximum voltage standing-wave ratio (VSWR) of 1.2 at DC-6GHz (typical value, that is not applicable to all products).

6. Compatibility

Mates will all industry standard MMCX connectors.