MM74HC165中文资料Parallel-in/Serial-out 8-Bit Shift Register数据手册ONSEMI规格书

描述 Description

General Description
The MM74HC165 high speed PARALLEL-IN/SERIAL-OUT SHIFT REGISTER utilizes advanced silicon-gate CMOS technology. It has the low power consumption and high noise immunity of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads.
This 8-bit serial shift register shifts data from QA to QH when clocked. Parallel inputs to each stage are enabled by a low level at the SHIFT/LOAD input. Also included is a gated CLOCK input and a complementary output from the eighth bit.
Clocking is accomplished through a 2-input NOR gate permitting one input to be used as a CLOCK INHIBIT function. Holding either of the CLOCK inputs high inhibits clocking, and holding either CLOCK input low with the SHIFT/LOAD input high enables the other CLOCK input. Data transfer occurs on the positive going edge of the clock. Parallel loading is inhibited as long as the SHIFT/LOAD input is HIGH. When taken LOW, data at the parallel inputs is loaded directly into the register independent of the state of the clock.
The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.

特性 Features

■ Typical propagation delay: 20 ns (clock to Q)
■ Wide operating supply voltage range: 2–6V
■ Low input current: 1 µA maximum
■ Low quiescent supply current: 80 µA maximum (74HC Series)
■ Fanout of 10 LS-TTL loads

简介

MM74HC165属于集成电路（IC）的移位寄存器。由ONSEMI制造生产的MM74HC165移位寄存器移位寄存器是低级逻辑器件，通常用于在串行和并行方式之间转换数字逻辑信号形式的数据，或在数字字内移动数据位的位置。移位寄存器通常使用集成到一个设备中的一组触发器来实现，常用于集成度更高的逻辑器件，但仍可用于 I/O 扩展等应用，在这些应用中离散形式的函数可能会非常有用。