Control of Lithium Ion Battery Charging and Discharging

Outline This IC was developed for use in controlling charging and discharging of lithium ion batteries (battery modules with three cells connected in series). In charging control, the voltage of the battery module as a whole is controlled in constant-voltage control. Discharge control and mo

文件：210 Kbytes 页数：8 Pages

MITSUMI

三美

Control of Lithium Ion Battery Charging and Discharging

Outline\nThis IC was developed for use in controlling charging and discharging of lithium ion batteries (battery modules\nwith three cells connected in series). In charging control, the voltage of the battery module as a whole is controlled in constant-voltage control. Discharge control and monitori 1. Charging control voltage VBATH=12.465V±1.5% (Ta=-20°C~70°C)\n2. Overcharge detection voltage VCELL=4.335V±1.5% (Ta=-20°C~70°C)\n3. Internal circuit for setting dead time (for overvoltage detection, discharge control)\n4. Low consumption current on overdischarge IBATH3=1µA typ.\n5. High-pr;

MinebeaMitsumi

美蓓亚三美

Fixed Frequency Current Mode Controller

文件：1.2134 Mbytes 页数：36 Pages

ONSEMI

安森美半导体

Integrated Circuit Phase Lock Loop (PLL) FM Multiplex Stereo Demod

Description: The NTE1248 is a phase lock loop (PLL) system monolithic integrated circuit in a 16–Lead DIP type package designed as an FM multiplex stereo demodulator. Features: A PLL for High Multiplex–Efficiency Operation. Stable Operation at Low Voltages (VCC = 5.4V Min) Low Lam

文件：22.83 Kbytes 页数：3 Pages

NTE

PA1248ST Cable Stripper

Product Description PA1248ST Coax Cable Stripper Tool RG-59, Mini-RG-59, RG-6, Black

文件：182.05 Kbytes 页数：1 Pages

BELDEN

百通