MLX92362中文资料迈来芯数据手册PDF规格书

Features

Normal or lateral magnetic sensitivity

options X,Y,Z

Switch output – fully isolated from the

supply voltage, OUTA/OUTB potentials can

be below GND or above VDD

Typical RON of 3Ω

Output current up to 100mA (AMR 200mA)

Programmable magnetic thresholds and

threshold temperature coefficient

Programmable magnetic Latch, Unipolar

and Omnipolar Switch function

Built-in daisy chain functionality to

synchronize multiple devices

Operating voltage range from 4.5V to 28V

Low average supply current – 180μA

typical

Under-Voltage Reset protection

Thermal protection

Package RoHS compliant TSOT-6L

Application Examples

Reed switch replacement

▪ Fluid level meter applications

▪ Push button

▪ Direct load driving

▪ HIGH/LOW side switch

Description

The MLX92362/61 is a monolithic sensor IC

sensitive to normal or lateral magnetic field.

The MLX92362/61 has two output pins, OUTA and

OUTB. They are connected to an integrated,

electrically isolated switch. The MLX92362 can be

programmed to output direct or inverted signal

from one of the two sensitive axes – X(Y) or Z. The

signal available on the output pins is result of

comparison between the applied magnetic field

and the pre-programmed magnetic thresholds BOP

and BRP for the selected sensitive axis.

The MLX92362/61 can be programmed to act as

magnetic latch, unipolar switch or omnipolar

switch.

The MLX92362/61 can be used as general

replacement of reed switches having the

advantage of solid-state reliability. Note that a

series of ICs can be connected in a single module,

and synchronized via the same 3-wire interface

thanks to the built-in daisy chain function.

Customers can benefit from the end-of-line (EoL)

programming capability of the MLX92362 or

alternatively, they can choose a pre-programmed

MLX92361 device.