MLX92211数据手册传感器变送器的磁性传感器-开关（固态）规格书PDF

描述 Description

The MLX92211 is the 2nd Gen Hall-effect latch designed in mixed signal CMOS technology. The device integrates a voltage regulator, Hall sensor with advanced offset cancellation system and an open-drain output driver, all in a single package.
Based on a brand new platform, the magnetic core is using an improved offset cancellation system allowing faster and more accurate processing while being temperature insensitive and stress independent. In addition is implemented a negative temperature coefficient of -1,100 ppm/degC to compensate the natural behavior of magnets becoming weaker with rise in temperature.
The included voltage regulator operates from 2.7 to 24 V, hence covering a wide range of applications. With the built-in reverse voltage protection, a serial resistor or diode on the supply line is not required so that even remote sensors can be specified for low voltage operation down to 2.7 V while being reverse voltage tolerant.
In the event of a drop below the minimum supply voltage during operation, the under-voltage lock-out protection will automatically freeze the device, preventing the electrical perturbation to affect the magnetic measurement circuitry. The output state is therefore only updated based on a proper and accurate magnetic measurement result.
The open drain output is fully protected against short-circuit with a built-in current limit. An additional automatic output shutoff is activated in case of a prolonged short-circuit condition. A self-check is then periodically performed to switch back to normal operation if the short-circuit condition is released.
The on-chip thermal protection also switches off the output if the junction temperature increases above an abnormally high threshold. It will automatically recover once the temperature decreases below a safe value.
With latching magnetic characteristics, the output is turned low or high respectively with a sufficiently strong South or North pole facing the package top side. When removing the magnetic field, the device keeps its previous state.
The MLX92211 is delivered in a Green compliant 3-pin TSOT for surface-mount process.

特性 Features

·Wide operating voltage range from 2.7 to 24 V
·Very high magnetic sensitivity: +/-3mT typical
·Chopper-stabilized amplifier stage
·Built-in negative temperature coefficient: -1.100 ppm/degC
·Reverse supply voltage protection
·Output current limit with auto-shutoff
·Under-voltage lockout protection
·Thermal protection
·High ESD rating/Excellent EMC performance
·Thin SOT23 3L green compliant package

应用 Application

·汽车行业 - 变速器
·汽车行业 - 动力系统
·汽车行业 - 车身、空调系统、舒适和照明