MKE18F512VLL16

Kinetis KE1xF with up to 512 KB Flash Up to 168 MHz ARM짰 Cortex짰-M4 Based Microcontroller

TheKE1xFmicrocontrollerisbuiltontheARM®Cortex®-M4 processorwithstrongerperformanceandhighermemory densitiesinmultiplepackages.Thisdeviceoffersupto168MHz performancewithintegratedsingle-precisionfloatingpointunit (FPU)anddigitalsignalprocessor(DSP).Embeddedf

ETC

MKE18F512VLL16

Kinetis KE18F: 160MHz Cortex-M4F 5V/Robust MCU, 512KB Flash + 64KB FlexMem, 64KB RAM, 2xCAN, 100LQFP; • Up to 168MHz Cortex-M4 core supporting a broad range of processing bandwidth requirements while maintaining excellent cost-effectiveness, easy to use packages and a wide range of memory densities\n• Enhanced robust IOs make sure the high performance under noisy environment\n• Flextimer featured 8ch PWM supports 3-phase motor control with dead time insertion and fault detect\n• 1MSPS 12b ADC with up to 16ch input per module, provides fast sampling rate for prompt data conversion and storage\n• Analog comparator for fast response to external analog change\n• Programmable delay block with flexible trigger system providing various interconnections for on chip modules, ADC, DAC, Flextimers, ACMP, etc.\n• CAN 2.0B compliant FlexCAN provides high reliable serial communication interface for industry applications\n• FlexIO provides flexibility for serial communication interface implementation\n• Boot ROM provides on chip boot code and serial port drivers that could save flash space and provide flexible boot options and in system programming support\n• Packages with big pin pitch make manufacture easy with high yield\n• 8KB Cache could improve the code and data access efficiency\n• Featuring digital signal processing capabilities with floating point unit offering outstanding computational power for control algorithms, sensor data processing, audio processing, among others, while increasing math accuracy and reducing code size\n• MPU for memory protect and code safety\n• Faster time to market with comprehensive enablement solutions, including SDK (drivers, libraries, stacks), IDE, bootloader, RTOS, online community and more\n;

Kinetis KE1xF MCUs are the high end series MCUs in Kinetis E family, providing robust 5V solution with the high performance Arm® Cortex®-M4 core running at up to 168 MHz. The Kinetis KE1xF MCU family also integrates CAN 2.0B compliant FlexCAN provides high reliable serial communication interface for industry applications, and rich suite of communication interfaces including LPUARTs, LPI2Cs, LPSPIs, and FlexIO.\n

ETC