MK60DN512VLL10

Voltage range: 1.71 to 3.6 V

Features •OperatingCharacteristics –Voltagerange:1.71to3.6V –Flashwritevoltagerange:1.71to3.6V –Temperaturerange(ambient):-40to105°C •Performance –Upto100MHzARMCortex-M4corewithDSP instructionsdelivering1.25DhrystoneMIPSper MHz •Memoriesandmemoryin

ETC

MK60DN512VLL10

Kinetis® K60-100 MHz，混合信号集成微控制器(MCU)，基于ARM® Cortex®-M4内核; Ultra-Low-Power • 10 low-power modes with power and clock gating for optimal peripheral activity and recovery times. Stop currents down to 2 µA, andrun currents of <350 µA/MHz, with 4 µs wake-up from Stop mode \n • Full memory and analog operation down to 1.71 volts for extended battery life \n • Low-leakage wake-up unit with up to eight internal modules and 16 pins as wake-up sources in low-leakage stop (LLS)/very low-leakage stop (VLLS) modes\n • Low-power timer for continuous system operation in reduced power state\n;

The Kinetis® K60 100 MHz IEEE® 1588Ethernet MCUs are built on the Arm® Cortex®-M4 core and feature advanced analog integration and serial communication.Available down to a 5 mm x 5 mm wafer-level chip-scale package (WLCSP), these devices maximize board space and enhance performance with minimum-length interconnections, allowing the miniaturization of existing applications.This family shares the comprehensive enablement and scalability of the Kinetis portfolio.

恩XP

MK60DN512VLL10

K60 Sub-Family

Features •OperatingCharacteristics –Voltagerange:1.71to3.6V –Flashwritevoltagerange:1.71to3.6V –Temperaturerange(ambient):-40to105°C •Performance –Upto100MHzARMCortex-M4corewithDSPinstructionsdelivering1.25DhrystoneMIPSperMHz •Memoriesand

MK60DN512VLL10

Hardware CRC module to support fast cyclic redundancy checks

MK60DN512VLQ10

NXP
LQFP144

恩XP