MIC826集成电路（IC）的监控器规格书PDF中文资料

MIC826属于集成电路（IC）的监控器。由美国微芯科技公司制造生产的MIC826监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。

General Description

The MIC826 is a low-current, ultra-small, voltage

supervisor with manual reset input, watchdog timer,

and active-high and active-low push-pull outputs. The

reset outputs are asserted and held when the supply

voltage falls below the factory-programmed threshold

voltage, when the /MR pin is pulled low, or if the

watchdog times out. Reset is asserted for the reset

timeout delay after the supply voltage increases above

the rising threshold voltage or when manual reset input

is asserted high.

The MIC826 features an integrated pull-up resistor on

the /MR. An active-low push-pull reset output (/RESET)

and an active-high reset output (RESET) provide

flexibility when interfacing with various

microcontrollers, PMICs, or load switches. The

watchdog input can be left unconnected for

applications that do not require watchdog monitoring.

The MIC826 consumes a quiescent current of only

3.8 μA and is offered in a tiny, space-saving, 6-lead

1.6 mm x 1.6 mm UDFN package. It is rated for the

–40°C to +125°C temperature range.

特性 Features

• Precision 1.8V to 5V Power Supply Monitor

• ±0.5 Threshold Accuracy at TA = +25°C

• ±1.5 Threshold Accuracy from TA = –40°C to +125°C

• 3.8 μA Supply Current (MIC826S/R/T/W/Y/Z)

• 4.8 μA Supply Current (MIC826L/M)

• Manual Reset Input

• 140 ms (min.) Reset Timeout Period

• 1.6s (typ.) Watchdog Timeout Period

• Float Watchdog Timer Input to Disable Watchdog Timer

• Active-High and Active-Low Push-Pull Outputs

• Ensured Reset Output Valid to VCC = 1V

• –40°C to +125°C Junction Temperature Range

• 6-Lead 1.6 mm x 1.6 mm x 0.5 mm UDFN Package

• 50 Smaller Version of MAX823/MAX824/MAX825/ADM823/ADM824/ADM825

• 8x Lower Watchdog Input Current than the Competition

Applications

• Microprocessor Systems

• Computers

• Intelligent Instruments