General Description

The MIC811 and MIC812 are inexpensive

microprocessor supervisory circuits that monitor power

supplies in microprocessor based systems.

The function of this device is to assert a reset if either

the power supply drops below a designated reset

threshold level or /MR is forced low. Several different

reset threshold levels are available to accommodate

3V, 3.3V, or 5V powered systems.

The MIC811 has an active-low /RESET output, while

the MIC812 offers an active-high RESET output. The

reset output remains asserted for a minimum of 140 ms

after VCC has risen above the designed reset threshold

level. Having a push-pull output stage, the MIC811/812

do not require a pull-up resistor at the output. The

MIC811 and MIC812 come in a 4-lead SOT-143

package.

If a microprocessor voltage supervisor with an

open-drain output stage is needed, see MIC6315.

Features

• Precision Voltage Monitor for 3V, 3.3V, or 5V

Power Supplies

• /RESET Remains Valid with VCC as Low as 1V

• 5 μA Typical Supply Current

• 140 ms Minimum Reset Pulse Width Available

• Manual Reset Input

• Available in 4-Lead SOT-143 Package

Applications

• Portable Equipment

• Intelligent Instruments

• Critical Microprocessor Power Monitoring

• Printers/Computers

• Controllers

MIC812TUY-TR属于集成电路（IC） > 监控器。微芯科技股份有限公司制造生产的MIC812TUY-TR监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。