MIC5400中文资料Dual 8-Output 14-Bit LED Video Display Driver数据手册Microchip规格书

描述 Description

The MIC5400 consists of two banks of 8 LED driver outputs, each output capable of sinking up to 30mA. Each bank is intended to drive 8 LED pixels of the same color. Most applications will use the MIC5400 to drive pixel clusters of 4 LEDs [RRGB] Typically two red LEDs are used for every one green and blue to compensate for red LED brightness.A single external resistor sets maximum drive current. Use of an external resistor allows different color LED banks to be biased to the same intensity. Brightness control is digitally programmed through the serial interface. Coarse brightness control is determined by two 4-bit DACs, one for each driver bank, limiting the full-scale output to a fraction of the maximum value. Additionally, each output has fine brightness control using 10-bit resolution PWM.Groups of drivers can be cascaded in daisy chain fashion. Open circuit output faults are detected and can be read back from the internal status register.

特性 Features

• Two banks of 8 outputs
• Output characteristics:
• Current sink: 30mA
• Programmable brightness control
• Coarse: 4-bit resolution DAC
• Fine: 10-bit resolution PWM
• Resistors sets maximum LED current to compensate variation in LEDs
• Current limit on each output
• Full protection:
• Over-temperature shutdown
• Watchdog disables output under fault condition
• Power-on reset (all LED's Off)
• Soft-start on power up and watchdog recovery
• Output open fault detention with status register readback
• Output transitions are staggered to minimize supply transients

简介

MIC5400属于集成电路（IC）的LED驱动器。由制造生产的MIC5400LED 驱动器器件属于 LED 驱动器电源管理集成电路 (PMIC) 系列，可通过标称固定电压的电源为负载（通常为发光二极管）提供电流，并且电流可控。它与用于电压调节的类似产品的主要区别在于，这类器件提供较低的反馈电压（以提高系统能效），而且通常可对器件工作点进行外部控制，可在照明应用中用于实现调光功能。