MIC5190中文资料Ultra Hi-Speed Hi-Current Active Filter/LDO Controller数据手册Microchip规格书

描述 Description

The MIC5190 is an ultra high-speed linear regulator. It uses an external N-Channel FET as its power device. The MIC5190 offers ultra high-speed to cope with the fast load demands of microprocessor cores, ASICs, and other high-speed devices. Signal bandwidths of greater than 500kHz can be achieved with a minimum amount of capacitance while at the same time keeping the output voltage clean, regardless of load demand. A powerful output driver delivers large MOSFETs into their linear regions, achieving ultra-low dropout voltage. 1.25VIN±10% can be turned into 0.9V ±1% without the use of a large amount of capacitance. MIC5190 (0.5V reference) is optimized for output voltages of below 1.0V. The MIC5190 is offered in 10-lead MSOP-10 packages and has an operating junction temperature range of -40°C to +125°C.

特性 Features

• Input voltage range: VIN = 0.9V to 5.5V
• ±1.0% initial output tolerance
• Dropout down to 25mV @ 10A
• Filters out switching frequency noise on input
• Very high large signal bandwidth >500kHz
• PSRR >40dB at 500kHz
• Adjustable output voltage down to 0.5V
• Stable with any output capacitor
• Excellent line and load regulation specifications
• Logic controlled shutdown
• Current limit protection
• MSOP-10 packages
• Available-40°C to +125°C junction temperature

简介

MIC5190属于集成电路（IC）的线性稳压器。由制造生产的MIC5190稳压器 - 线性稳压器控制器线性电压调节是指使用与负载串联的旁路元件（通常是双极型或场效应晶体管）以及对应的驱动控制电路，以在负载两端产生恒定的标称电压，负载通常对电路的电源电压变化或负载电流不敏感。该系列中的产品提供与外部旁路元件配合使用所必需的控制功能，从而将其与集成线性稳压器区分开来，后者将旁路元件与控制电路整合在单个器件封装中。