General Description

The MIC4126, MIC4127, and MIC4128 family are

highly-reliable dual 1.5A low-side MOSFET drivers

fabricated on Microchip’s BiCMOS/DMOS process.

The devices feature low power consumption and high

efficiency. The MIC4126/27/28 translate TTL or CMOS

input logic levels to output voltage levels that swing

within 25mV of the positive supply or ground whereas

comparable bipolar devices are capable of swinging

only to within 1V of the supply. The MIC4126/7/8 is

available in three configurations: dual inverting, dual

noninverting, and complimentary output.

The MIC4126/27/28 offer pin-compatible as well as

smaller footprint replacements for the MIC4426/27/28

with improved packaging and electrical performance.

The MIC4126/27/28 are available in exposed pad,

EPAD, SOIC-8L and MSOP-8L options as well as a

small-size VDFN ML™-8L option. The devices have an

input operating range of 4.5V to 20V.

Primarily intended for driving power MOSFETs,

MIC4426/7/8 drivers are suitable for driving other loads

(capacitive, resistive, or inductive) which require

low-impedance, high peak current, and fast switching

time. The devices can withstand up to 500mA of

reverse current (either polarity) without latching and up

to 5V noise spikes (either polarity) on ground pins.

Features

• Dual 1.5A-Peak Drivers

• 4.5V to 20V Operating Range

• Exposed Backside Pad Packaging Reduces Heat

- ePAD SOIC-8L (JA = 58°C/W)

- ePAD MSOP-8L (JA = 60°C/W)

- VDFN ML™-8L (JA = 60°C/W)

• Bipolar/CMOS/DMOS Construction

- 25mV maximum output offset from supply or

ground

• Latch-Up Protection to >200mA Reverse Current

• Switches 1000pF in 25ns

• Logic-Input Threshold Independent of Supply

Voltage

• Logic-Input Protection to –5V

• 6pF Typical Equivalent Input Capacitance

• Dual Inverting, Dual Noninverting, and

Complementary Configurations

- -40°C to +125°C operating junction temperature range

Applications

• DC/DC Converters

• Motor Drivers

• Clock Line Driver

MIC4127YML-TR属于集成电路（IC） > 栅极驱动器。微芯科技股份有限公司制造生产的MIC4127YML-TR栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。