General Description

The MIC33M650 is a pin-selectable output voltage,

high-efficiency, low-voltage input, 6A current, synchronous

step-down regulator power module with integrated

inductor. The COT control architecture with HyperLight

Load® mode provides very high efficiency at light loads,

while still having an ultra-fast transient response.

The MIC33M650 output voltage is set by two VSEL

(Voltage Selection) pins, between nine different values.

This method eliminates the need for an external feedback

resistor divider and improves the output voltage

setting accuracy.

The 2.4V to 5.5V input voltage range, low shutdown and

quiescent currents make the MIC33M650 ideal for

single-cell Li-Ion battery-powered applications. The 100

duty cycle capability provides low dropout operation,

extending operating range in portable systems.

The MIC33M650 pinout is compatible with the

MIC33M656 I2C-based programmable regulator version,

such that applications can be easily converted. An

open-drain PG output is provided to indicate when the

output voltage is within 9 of regulation and facilitates

the interface with an MCU or power sequencing. If set

in shutdown (EN = GND), the MIC33M650 typically

draws 1.5 μA, while the output is discharged through

10pull-down.

The MIC33M650 is available in a thermally efficient,

53-Lead, 6 mm x 10 mm x 3 mm B1QFN package, with

an operating junction temperature range from -40°C to +125°C.

Features

• 2.4V to 5.5V Input Voltage Range

• 6A Output Current

• Pin Strapping Voltage Selection:

- Tri-state pins (nine voltage options)

- 0.6V, 0.8V, 0.9V, 1.0V, 1.2V, 1.5V, 1.8V, 2.5V

or 3.3V output voltage

• Reduced Component Count (No Feedback

Resistors)

• High Efficiency (up to 95)

• Output Discharge when Disabled

• Constant-On-Time (COT) Control with High

Switching Frequency:

- 1.2 MHz typical at 1.0V output voltage

• ±1.5 Output Voltage Accuracy Over

Line/Load/Temperature Range

• 0.8 ms/V Soft Start Speed

• Supports Safe Start-up with Pre-Biased Output

• Typical 1.5 μA Shutdown Supply Current

• Low Dropout Operation (100 Duty Cycle)

• Ultra-Fast Transient Response

• Latch-Off Thermal Shutdown Protection

• Latch-Off Current Limit Protection

• Power Good (PG) Open-Drain Output

• Meets CISPR32 Class B Emissions

• Package: 53-Lead, 6 mm x 10 mm B1QFN

Applications

• Solid-State Drives (SSD)

• FPGAs, DSP and Low-Voltage ASIC Power

MIC33M650YMP属于集成电路（IC） > 稳压器 - DC-DC 开关稳压器。微芯科技股份有限公司制造生产的MIC33M650YMP稳压器 - DC-DC 开关稳压器DC-DC 开关稳压器 PMIC（电源管理集成电路）产品族中的产品是元器件级设备，用于需要稳定 DC 输入电压和/或将其转换为不同幅度的输出电压的应用。这些器件与称为“控制器”PMIC 的类似产品的区别在于集成了主开关元件，设备提供的电力会通过该元件。