MIC2950数据手册集成电路（IC）的线性+开关稳压器规格书PDF

描述 Description

The MIC2950 and MIC2951 are \"bulletproof\" micropower voltage regulators with very low dropout voltage (typically 40mV at light loads and 250mV at 100mA) and very low quiescent currents. Like their predecessors, the LP2950 and LP2951, the quiescent current of the MIC2950/MIC2951 increases only slightly in dropout, thus prolonging battery life. The MIC2950/MIC2951 are pin-for-pin compatible with the LP2950/LP2951, but offer lower dropout, lower quiescent current, reverse battery protection, and automotive load dump protection.
The key additional features and protection offered include higher output current (150mA), positive transient protection for up to 60V (load dump), and the ability to survive an unregulated input voltage transient of -20V below ground (reverse battery).
The plastic DIP and SOIC versions offer additional system functions such as programmable output voltage and logic-controlled shutdown. The 3-pin TO-92 MIC2950 is pin-for-pin compatible with the older 5V regulators.
These system functions also include an error flag output that warns of a low output voltage, which is often due to failing batteries on the input. This may also be used as a power-on reset. A logic-compatible shutdown input is also available that enables the regulator to be switched on and off. This part may also be pin-strapped for a 5V output or programmed from 1.24V to 29V with the use of two external resistors.

特性 Features

·High accuracy: 3.3V, 4.85V, or 5V with guaranteed 150mA output
·Extremely low quiescent current
·Low-dropout voltage
·Extremely tight load and line regulation
·Very low temperature coefficient
·Use as regulator or reference
·Needs only 1.5µF for stability
·Current and thermal limiting
·Unregulated DC input can withstand -20V reverse battery and +60V positive transients
·Error flag warns of output dropout (MIC2951)
·Logic-controlled electronic shutdown (MIC2951)
·Output programmable from 1.24V to 29V (MIC2951)

简介

MIC2950属于集成电路（IC）的线性+开关稳压器。由制造生产的MIC2950稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。