MIC2595中文资料Negative Voltage Hot-Swap Controller数据手册Microchip规格书

描述 Description

The MIC2589 and MIC2595 are single-channel, negative voltage hot swap controllers designed to address the need for safe insertion and removal of circuit boards into \"live\" system backplanes, while using few external components. The MIC2589/MIC2589R and the MIC2595/MIC2595R are each available in 14-pin SOIC packaging and work in conjunction with an external N-Channel MOSFET for which the gate drive is controlled to provide inrush current limiting and output voltage slew-rate control. Overcurrent fault protection is also provided via a programmable overcurrent threshold and filter. Very fast fault response is provided to ensure that system power supplies maintain regulation even during output short circuits. These controllers offer two responses to a circuit breaker fault condition: the MIC2589 and MIC2595 latch the circuit breaker's output off when the overcurrent threshold interval is exceeded and the overcurrent filter times out while the MIC2589R and MIC2595R automatically attempt to restart at a fixed duty cycle after a current limit fault. A primary Power-Good signal and two secondary (delayed and staggered) Power-Good signals are provided to indicate that the output voltage is within its valid operating range. These signals can be used to perform an all-at-once or a sequenced enabling of one or more DC-DC power modules.

特性 Features

·Provides safe insertion and removal from live -48V (nominal) backplanes
·Operates from -19V to -80V
·Fast responding circuit breaker (<1µs) to short circuit conditions
·User-programmable overcurrent detector response time
·Electronic circuit breaker function:·Output latch OFF (MIC2589/MIC2595)
·Output auto-retry (MIC2589R/MIC2595R)

·Active current regulation to control inrush currents
·Programmable undervoltage and overvoltage lockouts (MIC2589/MIC2589R)
·Programmable UVLO hysteresis (MIC2595/MIC2595R)
·Staggered 'Power-Good' output signals provide load sequencing·Active-HIGH (-1)
·Active-LOW (-2)

简介

MIC2595属于集成电路（IC）的热插拔控制器。由制造生产的MIC2595热插拔控制器PMIC - 热插拔控制器是能提供电路内保护和控制功能的半导体，可允许带电情况下在电路中插入或拔除其他组件。热插拔控制器可用于计算机网络和通用电源系统，主要根据输出电流、受控通道数量等特性，以及自动重试、故障超时和保护等特殊功能进行区分。