MIC2215数据手册开发板套件编程器的评估板-线性稳压器规格书PDF

描述 Description

The MIC2215 is a high performance, triple LDO voltage regulator, with each regulator capable of providing 250mA continuous output current. Ideal for battery operated applications, the MIC2215 offers 1% initial accuracy, extremely low dropout voltage (100mV @ 150mA), and low ground current at light load (typically 110µA per regulator). Equipped with a noise bypass pin and featuring very high power supply ripple rejection (PSRR) of up to 80dB, the MIC2215 provides the lowest noise and highest efficiency solution for RF applications in portable electronics such as cellular phones and wireless LAN applications. Equipped with TTL logic-compatible enable pins, each of the regulators in the MIC2215 can be put into a zero-current off-mode where the supply current is much less than 1µA when all the regulators are disabled. The MIC2215 is a µCap design, which enables a stable output with small ceramic output capacitors, reducing both cost and required board space for output bypassing.

特性 Features

• Input voltage range:+2.25V to +5.5V
• 70dB PSRR
• Stable with ceramic output capacitor
• High output accuracy:
• ±1.0% initial accuracy
• ±2.0% over temperature
• Low dropout voltage of 100mV @ 150mA
• Low quiescent current:110µA per regulator
• Fast turn-on time: 30µs
• Zero off-modecurrent
• Thermal shutdown protection
• Current-limit protection

简介

MIC2215属于开发板套件编程器的评估板-线性稳压器。由制造生产的MIC2215评估板 - 线性稳压器线性稳压器评估板是装有元器件的电路板，用于提供特定线性稳压器或器件的工作实例。每个 IC 的通道类型有单通道、双通道、三通道和四通道，稳压器类型包括负可调、负固定、正可调、正固定、正负可调、正固定/可调。电压输出范围为 -15V 至 56V，电流输出范围为 10mA 至 5A。