MIC2165数据手册集成电路（IC）的PMIC-稳压器-DCDC开关式控制器规格书PDF

描述 Description

The MIC2165 is a synchronous adaptive on-time buck controller targeting high performance, cost sensitive applications such as set-top boxes, gateways, routers, computing peripherals, and telecom/networking equipment.

The MIC2165 operates over a supply range of 4.5V to 28V. It has an internal linear regulator which provides a regulated 5V supply to power the internal control circuitry. MIC2165 operates at a constant 600kHz switching frequency and can be used to drive up to 25A of output current. The output voltage is adjustable from 0.8V to 5.5V.

A unique Hyper Speed Control™ architecture enables ultra-fast transient response while reducing the output capacitance and also makes High VIN/Low VOUT operation possible.

A UVLO feature is provided to ensure proper operation under power-sag conditions to prevent the external power MOSFET from over heating. Also, a soft start feature is provided to reduce the inrush current. Short current sensing on the bottom MOSFET with hiccup mode operation ensures protection in case of an output short circuit. Further, the MIC2165 includes an EN pin to shut down the converter and a Power Good (PGOOD) pin to allow simple sequencing.

The MIC2165 is available in a 10-pin MSOP ePad package with a junction operating temperature range from -40°C to +125°C.

特性 Features

• Hyper Speed Control™ architecture enables
• High VIN/Low VOUT operation (VIN=28V and VOUT=0.8V)
• Smallest output capacitance
• HyperLight Load® Efficiency
• Built-in 5V regulator for single-supply operation
• Any Capacitor™ stable
• Zero ESR to high ESR
• Power-Good output
• Input voltage range: 4.5V to 28V
• 5 µA typical shutdown current
• 25A output current drive capability
• Adjustable output from 0.8Vto 5.5V with ±1% FB Accuracy
• 600kHz switching frequency
• Internal 5ms digital soft start
• Thermal shutdown and \"hiccup\" current limit protection
• No external current-sense resistor required
• Safe start-up into pre-biased loads
• 10-pin MSOP ePad package
• -40°C to +125°C junction temperature range

简介

MIC2165属于集成电路（IC）的PMIC-稳压器-DCDC开关式控制器。由制造生产的MIC2165DC-DC 开关控制器PMIC（电源管理集成电路）DC 到 DC 开关式控制器是用于高效率电路的稳压 IC，其配置为生成高于（突升或步升）或低于（突降或步降）输入电源的输出电源电压。其他拓扑结构可能包括：降压-升压、反激、正激、Cuk、SEPIC、全桥、半桥和推挽式。这些器件不同于需要最小电压并“烧尽”多余电压的线性稳压器。