MIC1555中文资料IttyBitty® CMOS RC timer/oscillator数据手册Microchip规格书

描述 Description

The MIC1555 IttyBitty® CMOS RC timer/oscillator and MIC1557 IttyBitty® CMOS RC oscillator are designed to provide rail-to-rail pulses for precise time delay or frequency generation.The devices are similar in function to the industry standard \"555\", without a frequency control (FC) pin or an opencollector discharge (D) pin. The threshold pin (TH) has precedence over the trigger (TR) input, ensuring that the BiCMOS output is off when TR is high.The MIC1555 may be used as an astable (oscillator) or monostable (one-shot) with separate threshold and trigger inputs. In the one-shot mode, the output pulse width is precisely controlled by an external resistor and a capacitor.Time delays may be accurately controlled from microseconds to hours. In the oscillator mode, the output is used to provide precise feedback, with a minimum of one resistor and one capacitor producing a 50% duty cycle square wave.The MIC1557 is designed for astable (oscillator) operation only, with a chip select/reset (CS) input for low power shutdown. One resistor and one capacitor provide a 50% duty cycle square wave. Other duty-cycle ratios may be produced using two diodes and two resistors. The MIC1555/7 is powered from a +2.7V to +18V supply voltage.The MIC1555/7 is available in the SOT-23-5 5-pin package, and is rated for -40°C to +85°C ambient temperature range.

特性 Features

• +2.7V to +18V operation
• Low current
• <1µA typical shutdown mode (MIC1557)
• 200µA typical (TRG and THR low) at 3V supply
• Timing from microseconds to hours
• \"Zero\" leakage trigger and threshold inputs
• 50% square wave with one Resistor, one Capacitor
• Threshold input precedence over trigger input
• <15Ω output on resistance
• No output cross-conduction current spikes
• <0.005%/°C temperature stability
• <0.055%/V supply stability
• Small SOT-23-5 surface mount package

简介

MIC1555属于集成电路（IC）的可编程定时器振荡器。由制造生产的MIC1555可编程定时器和振荡器可以设置用来以指定频率提供定时脉冲的器件。