Passive Line Termination Circuit Advance Information

Description The MH89101 is a thick film hybrid device which is used in conjunction with the MT8910 to perform two to four wire conversion and analog signal conditioning on the received 2B1Q signal. Features • Passive Line Termination (PLT) for MT8910 DSLIC • High precision trimmed resistors •

文件：63.35 Kbytes 页数：4 Pages

MITEL

Passive Line Termination Circuit

Microchip

微芯科技

Digital subscriber line interface circuits for ISDN NT1 and NT2 DSL interface, digital PABX line cards and telephone sets, digital multiplexers and concentrators and for pair gain systems.

Mitel

5GHZ 첨10 Fixed Modulus Divider

The SP8910 is one of a range of very high speed low power prescalers for professional applications. The dividing elements are static D type flip flops and therefore allow operation down to DC if the drive signal is a pulse waveform with fast risetime. The output stage has internal100 ohm pull up r

文件：96.02 Kbytes 页数：6 Pages

MITEL

5GHZ 첨10 Fixed Modulus Divider

The SP8910 is one of a range of very high speed low power prescalers for professional applications. The dividing elements are static D type flip flops and therefore allow operation down to DC if the drive signal is a pulse waveform with fast risetime. The output stage has internal100 ohm pull up r

文件：96.02 Kbytes 页数：6 Pages

MITEL

1490 nm TX / 1310 nm RX , 3.3V / 4.25 Gbps 1-Fiber SMLC SFP Transceiver

文件：151.77 Kbytes 页数：6 Pages

OPTOWAY

奥普薇