MFRC500中文资料飞利浦数据手册PDF规格书

INTRODUCTION

Scope

The MF RC500 is member of a new family of highly integrated reader ICs for contactless communication on 13,56MHz. This new reader IC family utilises an outstanding modulation and demodulation concept completely integrated for all major kinds of passive contactless communication methods and protocols on 13,56MHz.

The MF RC500 supports all layers of ISO14443A.

The internal transmitter part is able to drive a proximity antenna (up to 100mm) directly without additional active circuitry.

The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals of ISO14443A compatible transponders.

特性 Features

· Highly integrated analog circuitry to decode card response

· Buffered output drivers to connect an antenna with minimum number of external components

· Proximity operating distance (up to 100 mm)

· Fast internal oscillator buffer to connect 13.56 MHz quartz

· Clock frequency monitoring

· Hard reset with low power functions

· Power down mode per software

· Parallel µController interface with internal address latch and IRQ line

· Automatic detection of parallel µC interface type

· Comfortable send and receive FIFO buffer

· Anti-collision procedure support

· Bit- and byte-oriented framing

· Unique serial number

· Onboard timer circuit

· Supports MIFARE® PRO and ISO 14443A (transparent mode and T=”CL” )

· Supports MIFARE® Classic

· Crypto1 and secure non-volatile internal key memory

· Supports MIFAREÒ active antenna concept.

· Suitable for high security terminals with SAM’s based on e.g. triple DES, RSA, elliptic curves

Applications

The MF RC500 is tailored to fit the requirements of various applications using contactless communication based on ISO/IEC 14443A standard where cost-effectiveness, small size, high performance with a single voltage supply are important.

· Public transport terminals

· Handheld terminals

· On board units

· Contactless PC terminals

· Metering

· Contactless public phones