MCZ33903BD3EK中文资料SBC W/HIGH SPEED CAN 3.3V数据手册恩XP规格书

描述 Description

The NXP® MC33903 is part of a second generation family of system basis chips, combining multiple features and enhanced module design.
The MC33903 works as an advanced power management unit for the MCU and additional integrated circuits such as sensors and CAN transceivers
Built-in enhanced high-speed CAN interface (ISO11898-2 and -5), with local and bus failure diagnostics, protection and fail-safe operation mode.
The SBC may include zero, one or two LIN 2.1 interfaces with LIN output pin switches.

特性 Features

• Voltage regulator for MCU, 5.0 V or 3.3 V, part number selectable, with possibility of usage external PNP to extend current capability and share power dissipation
• Voltage, current and temperature protection
• Extremely low quiescent current in low power modes
• Fully-protected embedded 5.0 V regulator for the CAN driver
• Multiple under-voltage detections to address various MCU specifications and system operation modes (i.e. cranking)
• Auxiliary 5.0 V or 3.3 V SPI configurable regulator, for additional ICs, with over-current detection and under-voltage protection
• MUX (except 33903B3/5) output pin for device internal analog signal monitoring and power supply monitoring
• Advanced SPI, MCU, ECU power supply and critical pins diagnostics and monitoring
• Multiple wake-up sources in low-power modes: CAN or LIN bus, I/O transition, automatic timer, SPI message and VDD over-current detection
• ISO11898-5 high-speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s
• This product is included in NXP’s product longevity program, with assured supply for a minimum of 15 years after launch

应用 Application

Automotive
•Hybrid and Electric Vehicle Power Inverter