MCP65R46T中文资料微芯科技数据手册PDF规格书

Description:

The Microchip Technology Inc. MCP65R41/6 family of

push-pull and open-drain output comparators are

offered with integrated reference voltages of 1.21V and

2.4V. This family provides ±1 (typical) tolerance while

consuming 2.5 μA (typical) current. These comparators

operate with a single-supply voltage as low as 1.8V to

5.5V, which makes them ideal for low cost and/or

battery powered applications.

These comparators are optimized for low-power,

single-supply applications with greater than rail-to-rail

input operation. The output limits supply current surges

and dynamic power consumption while switching. The

internal input hysteresis eliminates output switching

due to internal noise voltage, reducing current draw.

The MCP65R41 output interfaces to CMOS/TTL logic.

The open-drain output device MCP65R46 can be used

as a level-shifter from 1.6V to 10V using a pull-up

resistor. It can also be used as a wired-OR logic.

This family of devices is available in the 6-lead SOT-23 package.

Features:

• Factory Set Reference Voltage

- Available Voltage: 1.21V and 2.4V

- Tolerance: ±1 (typical)

• Low Quiescent Current: 2.5 μA (typical)

• Propagation Delay: 4 μs with 100 mV Overdrive

• Input Offset Voltage: ±3mV (typical)

• Rail-to-Rail Input: VSS - 0.3V to VDD + 0.3V

• Output Options:

- MCP65R41 Push-Pull

- MCP65R46 Open-Drain

• Wide Supply Voltage Range: 1.8V to 5.5V

• Packages: SOT23-6

Typical Applications:

• Laptop Computers

• Mobile Phones

• Hand-held Metering Systems

• Hand-held Electronics

• RC Timers

• Alarm and Monitoring Circuits

• Window Comparators

Design Aids:

• Microchip Advanced Part Selector (MAPS)

• Analog Demonstration and Evaluation Boards