MCP4022数据手册集成电路（IC）的数字电位计规格书PDF

描述 Description

The MCP402X devices are non-volatile, 6-bit (64 wiper steps) digital potentiometers with a simple up/down serial interface. The MCP402X devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count. The MCP4021 device offers a voltage divider (potentiometer), with all terminals available on pins. The MCP4022 is a true rheostat, with both nodes of the resistor available on pins. The MCP4023 device offers a voltage divider (potentiometer), with one terminal connected to ground. The MCP4024 device is a rheostat mode device, with one terminal of the resistor connected to ground. The devices offer WiperLock™ Technology which allows the user unlimited reprogramming and locking of the wiper setting. This is useful for equipment that requires factory trimming or recalibration. The MCP402X family of devices are available with resistor values of 2.5kΩ, 5kΩ, 10kΩ and 50kΩ. These devices operate from a single 2.7-5.5V supply and draw less than 1 µA while operating in the static state. Also consider using the MCP4021, MCP4023 and MCP4024

特性 Features

NonVolatile Digital Potentiometer in SOT-23 packages
64 Taps: 63 Resistors with Taps to VSS and VDD
Simple Up/Down (U/D) Protocol
Automatic Recall of Potentiometer Wiper Settings
Resistance Values: 2kΩ, 5kΩ, 10kΩ, 50kΩ
Absolute (Rheostat): Ratiometric (Potentiometer): Low Wiper Resistance: 70Ω (typ.)
WiperLock™ Technology to Secure the EEPROM
Low-Power Operation: 1µA Max Static Current
Wide Operating Voltage: 2.7V to 5.5V
Extended Temperature Range: -40°C to +125°C

简介

MCP4022属于集成电路（IC）的数字电位计。由制造生产的MCP4022数字电位计数字电位器是一系列集成电路器件，可提供类似于传统机械电位器或变阻器的可调节电阻，但通过电子信号而非机械输入来进行控制。虽然这些器件的电阻可耗散的电能相对有限，但其电子控制能力有助于小型化、自动化和远程控制信号级模拟电路，而这些电路本来可能会使用机械电位器。