MCP3909开发板套件编程器的评估板-模数转换器（ADC）规格书PDF中文资料

MCP3909属于开发板套件编程器的评估板-模数转换器（ADC）。由微芯科技股份有限公司制造生产的MCP3909评估板 - 模数转换器（ADC）模数转换器 (ADC) 评估板是预装有元器件的电路板，用于提供特定 ADC 或器件工作实例。特定板上的 A/D 转换器数量从 3 到 32 不等，每秒采样率从 2.5 kHz 到 26 GHz 不等，输入电压范围从 0 到 8 Vp-p。

描述 Description

The MCP3909 device is an energy-metering IC designed to support the IEC 62053 international metering standard specification. It supplies a frequency output proportional to the average active real power, with simultaneous serial access to ADC channels and multiplier output data. This output waveform data is available at up to 14 kHz with 16-bit ADC output and 20-bit multiplier output words. The 16-bit, delta-sigma ADCs allow for a wide range of IB and IMAX currents and/or small shunt (

特性 Features

• Supports IEC 62053 International Energy Metering Specification

• Digital Waveform Data Access Through SPI Interface

- 16-bit Dual ADC Output Data Words

- 20-bit Multiplier Output Data Word

• Dual Functionality Pins Support Serial Interface Access and Simultaneous Active Power Pulse Output

• Two 16-bit Second Order Delta-sigma Analogto-Digital Converters (ADCs) with Multi-bit DAC

- 81 dB SINAD (typical) on Both Channels

• 0.1 Typical Active Energy Measurement Error Over 1000:1 Dynamic Range

• PGA for Small Signal Input Supports Low Value Shunt Current Sensor

• Ultra-low Drift On-chip Reference,15 ppm/°C (typical)

• Direct Drive for Electromagnetic Mechanical Counter and Two-phase Stepper Motors

• Low IDD of 4 mA (maximum)

• Tamper Output Pin for Negative Power Indication

• Temperature Ranges:

- Industrial: -40°C to +85°C

- Extended: -40°C to +125°C