MCP37D11-200数据手册集成电路（IC）的模数转换器（ADC）规格书PDF

描述 Description

The MCP37D11-200 is a 12-bit pipelined A/D converter with a maximum sampling rate of 200 Msps. The high accuracy of 71.3 dB Signal-to-Noise Ratio (SNR) and over 90 dB Spurious Free Dynamic Range (SFDR) enable high precision measurements of fast input signals. The device operates at very low power consumption of 468 mW at 200 Msps including LVDS digital I/O. Lower power saving modes are available at 144 mW for Standby and 28 mW for Shutdown. The MCP37D11-200 includes many digital processing features that simplify system design, cost and power usage. These include an integrated digital down-converter with onboard NCO, decimation filters for improved SNR, a noise-shaping requantizer for SNR improvement around a bandwidth of interest, individual phase, offset and gain adjustment and a fractional delay recovery for time-delay corrections in multi-channel modes. Data is available through the serial DDR LVDS or parallel CMOS interface and configured via SPI. The device is available in the TFBGA-121 and VTLA-124 packages. TFBGA-121 package is qualified for automotive applications (AEC-Q100).

特性 Features

• 12-bit resolution
• 200 Msps maximum sampling rate
• Low power 468 mW operation at full sampling rate, including LVDS digital I/O
• Power saving modes of 144 mW during Standby and 28 mW during Shutdown
• 71.3 dBFS SNR at 200 Msps
• >90 dBFS SFDR at 200 Msps
• Integrated digital down-converter
• Decimation filters for improved SNR
• Noise-shaping requantizer
• Phase, offset and gain adjustment of individual channels
• Fractional delay recovery for time-delay corrections in multi-channel operations (dual/octal-channel modes)
• Input channel bandwidth of 500 MHz
• Output data format in serial DDR LVDS or parallel CMOS
• Configuration via Serial Peripheral Interface (SPI)
• TFBGA-121 Package: AEC-Q100 qualified, Temperature Grade 1: -40°C to +125°C
• VTLA-124 Package: Temperature Range: -40°C to +85°C

简介

MCP37D11-200属于集成电路（IC）的模数转换器（ADC）。由制造生产的MCP37D11-200模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。