MCP3001集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

MCP3001属于集成电路（IC）的模数转换器（ADC）。由微芯科技股份有限公司制造生产的MCP3001模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

Description

The Microchip Technology Inc. MCP3001 is a succes sive approximation 10-bit A/D converter (ADC) with on board sample and hold circuitry. The device provides a single pseudo-differential input. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are both specified at ±1 LSB max. Communication with the device is done using a simple serial interface compatible with the SPI protocol. The device is capable of sample rates up to 200 ksps at a clock rate of 2.8 MHz. The MCP3001 operates over a broad voltage range (2.7V - 5.5V). Low current design permits operation with a typical standby current of only 5 nA and a typical active current of 400 µA. The device is offered in 8-pin PDIP, MSOP, TSSOP and 150 mil SOIC packages.

Features

• 10-bit resolution

• ±1 LSB max DNL

• ±1 LSB max INL

• On-chip sample and hold

• SPI™ serial interface (modes 0,0 and 1,1)

• Single supply operation: 2.7V - 5.5V

• 200 ksps sampling rate at 5V

• 75 ksps sampling rate at 2.7V

• Low power CMOS technology

- 5 nA typical standby current, 2 µA max

- 500 µA max active current at 5V

• Industrial temp range: -40°C to +85°C

• 8-pin PDIP, SOIC, MSOP and TSSOP packages

Applications

• Sensor Interface

• Process Control

• Data Acquisition

• Battery Operated Systems