MCP2210数据手册集成电路（IC）的控制器规格书PDF

描述 Description

The MCP2210 device is a USB-to-SPI Master converter which enables USB connectivity in applications that have an SPI interface. The device reduces external components by integrating the USB termination resistors.The MCP2210 also has 256 bytes of integrated user EEPROM.The MCP2210 has nine general purpose input/output pins. Seven pins have alternate functions to indicate USB and communication status.

Please see our MikroElektronika click board!  http://www.mikroe.com/click/usb-spi

特性 Features

Universal Serial Bus (USB)
• Supports full-speed USB (12 Mb/s)
• Human Interface Device (HID) device
• 128-byte Buffer to handle data throughput:
• 64-byte transmit
• 64-byte receive
• Fully configurable VID, PID assignments and string descriptors
• Bus powered (factory default) or self-powered (can be selected through special USBcommands)
• USB 2.0 Compliant
USB Driver and Software Support
• Uses standard HID drivers (built-in support on Windows® XP, Vista, 7, Linux andMac OS®)
• Configuration utility for device’s power-up configuration
• Utility for USB-SPI communication, GPIO manipulation and miscellaneous featuresusage
SPI Master peripheral
• Supports all four SPI modes (Mode 0, 1, 2, 3)
• Bit-rates from 1500 bps up to 12 Mbps
• Configurable delays for SPI transactions:
• Chip Select (assert) to 1st byte of data delay
• Data to data delay
• Data to Chip Select (de-assert) delay
• SPI transactions lengths of up to 65535 bytes long
• Up to 9 Chip Select lines – to be used in any combination for a given SPI transaction(the chip select lines are shared between GPIOs and alternate function pins; certainGPs – up to 9 of them – can be assigned with the chip select functionality)
General Purpose Input/Output (GPIO) Pins
• Nine general purpose I/O pins
EEPROM
• 256 bytes of user EEPROM (accessible only through certain USB commands)

简介

MCP2210属于集成电路（IC）的控制器。由制造生产的MCP2210控制器该系列产品主要用于在采用不同通信协议和/或信令方法的端点之间提供信息连接。示例包括将 I2C 总线连接到 UART，将 USB 连接到 I2C、SPI、以太网或 UART、以太网 MAC 和 PHY 等的器件。此外，还包括用于通过为点对点通信设计的接口建立多路连接的器件，例如 USB 集线器控制器。