MCP16415-I/UN集成电路（IC）的稳压器-DC-DC开关稳压器规格书PDF中文资料

MCP16415-I/UN属于集成电路（IC）的稳压器-DC-DC开关稳压器。由微芯科技股份有限公司制造生产的MCP16415-I/UN稳压器 - DC-DC 开关稳压器DC-DC 开关稳压器 PMIC（电源管理集成电路）产品族中的产品是元器件级设备，用于需要稳定 DC 输入电压和/或将其转换为不同幅度的输出电压的应用。这些器件与称为“控制器”PMIC 的类似产品的区别在于集成了主开关元件，设备提供的电力会通过该元件。

Description

The MCP1641X Step-up DC-DC Converters family

provides an automatic input-to-output voltage bypass

operation, which helps optimize battery utilization and

achieve high efficiency, while the nominal voltage of

fresh batteries remains in the same range with the converter’s

output value. The MCP1641X can be powered

by either single-cell, two-cell alkaline/NiMH batteries or

single-cell Li-Ion/Li-Polymer batteries.

A low-voltage designed architecture allows the

regulator to start up without high inrush current or

output voltage overshoot from a low input voltage. The

start-up voltage is easily programmed by a resistive

divider connected to the UVLO pin. If the resistive

divider is not used, the default start-up voltage is 0.85V.

The 0.8V built-in UVLOSTOP helps prevent deep discharge

of the alkaline battery, which can cause battery

leakage. An open-drain Low Battery Output (LBO) pin

warns the user to replace the battery if the input voltage

ramps down to the programmed UVLOSTART value.

The MCP1641X family introduces an additional safety

feature to a low-voltage boost converter: Overtemperature

Output. Devices, such as personal care

products, Bluetooth headsets or toys, will benefit from

the combined Power Good and Die Overtemperature

(PGT) output, which flags a warning signal when the output

voltage level drops within 10 or the die temperature

exceeds the +75°C (typical).(1) Both functions are

implemented in the MCP16411/2/3/4 devices (on the

same pin, PGT), while the MCP16415/6/7/8 devices

have only the Power Good option.

Features

• Input Voltage Range: 0.8V (after Start-up) 

to 5.25V

• Low Device Quiescent Current: 5 μA (typical),

PFM Mode (not switching)

• Up to 96 Efficiency

• 1A Typical Inductor Peak Current Limit:

- IOUT > 170 mA at 2V VOUT, 1.2V VIN

- IOUT > 200 mA at 3.3V VOUT, 1.5V VIN

- IOUT > 600 mA at 5.0V VOUT, 3.6V VIN

• Adjustable Output Voltage Range

• Automatic Input-to-Output Bypass Operation

• Selectable Switching Mode:

- PWM operation: 500 kHz (MCP16412/4/6/8)

- Automatic PFM/PWM operation

(MCP16411/3/5/7)

• Programmable Undervoltage Lockout (UVLO)

• Programmable Low Battery Output (LBO)

• Selectable Status Indicator:

- Power Good and Die Overtemperature 

output (MCP16411/2/3/4)

- Power Good output (MCP16415/6/7/8)

• Internal Synchronous Rectifier

• Internal Compensation

• Inrush Current Limiting and Internal Soft Start

• Low Noise, Anti-Ringing Control

• Thermal Shutdown

• Selectable Shutdown States:

- Output discharge option (MCP16411/2/5/6)

- Input-to-output bypass option

(MCP16413/4/7/8)

• Shutdown Current: 2.3 μA (typical)

• Available Packages:

- 10-Lead MSOP

- 10-Lead 3 mm x 3 mm TDFN

Applications

• Personal and Health Care Products

• Single-Cell or Two-Cell Powered IoT Devices

• Bluetooth® Headsets

• Remote Controllers, Portable Instruments

• Wireless Sensors, Data Loggers