MCP16312T-E/MS集成电路（IC）的稳压器-DC-DC开关稳压器规格书PDF中文资料

MCP16312T-E/MS属于集成电路（IC）的稳压器-DC-DC开关稳压器。由微芯科技股份有限公司制造生产的MCP16312T-E/MS稳压器 - DC-DC 开关稳压器DC-DC 开关稳压器 PMIC（电源管理集成电路）产品族中的产品是元器件级设备，用于需要稳定 DC 输入电压和/或将其转换为不同幅度的输出电压的应用。这些器件与称为“控制器”PMIC 的类似产品的区别在于集成了主开关元件，设备提供的电力会通过该元件。

General Description

The MCP16311/2 is a compact, high-efficiency, fixed

frequency, synchronous step-down DC-DC converter in

an 8-pin MSOP, or 2 x 3 mm TDFN package that

operates from input voltage sources up to 30V.

Integrated features include a high-side and a low-side

switch, fixed frequency peak current mode control,

internal compensation, peak current limit and

overtemperature protection. The MCP16311/2 provides

all the active functions for local DC-DC conversion, with

fast transient response and accurate regulation.

High converter efficiency is achieved by integrating the

current-limited, low-resistance, high-speed high-side

and low-side switches and associated drive circuitry.

The MCP16311 is capable of running in PWM/PFM

mode. It switches in PFM mode for light load

conditions and for large buck conversion ratios. This

results in a higher efficiency over all load ranges. The

MCP16312 runs in PWM-only mode, and is

recommended for noise-sensitive applications.

The MCP16311/2 can supply up to 1A of continuous

current while regulating the output voltage from 2V to

12V. An integrated, high-performance peak current

mode architecture keeps the output voltage tightly

regulated, even during input voltage steps and output

current transient conditions common in power systems.

The EN input is used to turn the device on and off.

While off, only a few micro amps of current are

consumed from the input.

Output voltage is set with an external resistor divider.

The MCP16311/2 is offered in small MSOP-8 and

2 x 3 mm TDFN surface mount packages.

特性 Features

• Up to 95 Efficiency

• Input Voltage Range: 4.4V to 30V

• 1A Output Current Capability

• Output Voltage Range: 2.0V to 24V

• Qualification: AEC-Q100 Rev. G, Grade 1

(-40°C to +125°C)

• Integrated N-Channel High-Side and Low-Side

Switches:

- 170m, Low Side

- 300m, High Side

• Stable Reference Voltage: 0.8V

• Automatic Pulse Frequency Modulation/Pulse-

Width Modulation (PFM/PWM) Operation

(MCP16311):

- PFM Operation Disabled (MCP16312)

- PWM Operation: 500 kHz

• Low Device Shutdown Current: 3 μA Typical

• Low Device Quiescent Current:

- 44 μA (Non-switching, PFM Mode)

• Internal Compensation

• Internal Soft-Start: 300 μs (EN Low-to-High)

• Peak Current Mode Control

• Cycle-by-Cycle Peak Current Limit

• Undervoltage Lockout (UVLO):

- 4.1V typical to start

- 3.6V typical to stop

• Overtemperature Protection

• Thermal Shutdown:

- +150°C

- +25°C Hysteresis

Applications

• PIC® /dsPIC® Microcontroller Bias Supply

• 24V Industrial Input DC-DC Conversion

• General Purpose DC-DC Conversion

• Local Point of Load Regulation

• Automotive Battery Regulation

• Set-Top Boxes

• Cable Modems

• Wall Transformer Regulation

• Laptop Computers

• Networking Systems

• AC-DC Digital Control Bias

• Distributed Power Supplies