MCF8316D中文资料德州仪器数据手册PDF规格书

1 Features

• Three-phase BLDC motor driver with integrated

sensorless motor control algorithm

– Code-free Field Oriented Control (FOC)

– Speed, current, power, and voltage control

modes

– Forward and reverse windmilling support

– Configurable power and speed limit

– Lead angle adjustment for high efficiency

– Improved acoustic performance with soft-start,

soft-stop and dead time compensation

– Offline motor parameter measurement with

Motor Parameter Extraction Tool (MPET)

– Analog, PWM, frequency, or I2C based speed

input

– Configurable motor start-up and stop options

– Flux weakening for high-speed operation

– Anti-voltage surge (AVS) protection

– Variable monitoring through DACOUT pins

• 4.5 to 35V operating voltage (40V abs max)

• High output current capability: 8A peak

• Low MOSFET on-state resistance

– RDS(ON) (HS + LS) at TA = 25°C : 95mΩ (typ.)

• Low power sleep mode: Refer Table 6-8

– 5μA (maximum) at VVM = 24V, TA = 25°C

• Speed loop accuracy: 3% with internal clock and

1% with external clock reference

• Configurable EEPROM with R/W security to store

device configuration

• Does not require external current sense resistors;

uses built-in current sensing

• Built-in 3.3V, 20mA LDO regulator

• Built-in 3.3V/5V, 170mA buck regulator

• Dedicated DRVOFF pin to disable (Hi-Z) outputs

• Spread spectrum, PWM dithering, and slew rate

for EMI reduction

• Suite of integrated protection features

– Supply under voltage lockout (UVLO)

– Supply over voltage protection (OVP)

– Motor lock detection

– Configurable current limit

– Thermal warning and shutdown (OTW/TSD)

– Fault condition indication pin (nFAULT)

– Optional fault diagnostics over I2C interface

2 Applications

• Brushless-DC (BLDC) Motor Modules

• Washer and Dishwashers Pumps

• Air Purifiers and Humidifier Fans

• Small Home Appliances

• Residential and Living Fans

• Projector Color Wheels

3 Description

The MCF8316D provides a single-chip, code-free

sensorless FOC device for customers driving speedcontrolled

12 to 24V brushless-DC motors (BLDC) or

Permanent Magnet Synchronous motor (PMSM) up

to 8A peak current. The MCF8316D integrates three

½-bridges with 40V absolute maximum capability and

a very low RDS(ON) of 95mΩ (high-side + low-side

FETs). MCF8316D integrates power management

circuits including a voltage-adjustable buck regulator

(3.3V/5V, 170mA) and LDO (3.3V, 20mA) that can be

used to power external circuits.

The FOC algorithm configuration can be stored

in non-volatile EEPROM, which allows the device

to operate stand-alone once the device has been

configured. The device receives a speed command

through a PWM input, analog voltage, variable

frequency square wave or I2C command. There are

a large number of protection features integrated into

the MCF8316D, intended to protect the device, motor,

and system against fault events.