Description

The MC68HC908QY4 is a member of the low-cost, high-performance

M68HC08 Family of 8-bit microcontroller units (MCUs). The M68HC08 Family

is a Complex Instruction Set Computer (CISC) with a Von Neumann

architecture. All MCUs in the family use the enhanced M68HC08 central

processor unit (CPU08) and are available with a variety of modules, memory

sizes and types, and package types.

Features

Features include:

• High-performance M68HC08 CPU core

• Fully upward-compatible object code with M68HC05 Family

• 5-V and 3-V operating voltages (VDD)

• 8-MHz internal bus operation at 5 V, 4-MHz at 3 V

• Trimmable internal oscillator

– 3.2 MHz internal bus operation

– 8-bit trim capability, ± 5 trimmed

• Auto wakeup from STOP capability

• Configuration (CONFIG) register for MCU configuration options,

including low-voltage inhibit (LVI) trip point

• In-system FLASH programming

• FLASH security(1)

• On-chip in-application programmable FLASH memory (with internal

program/erase voltage generation)

– MC68HC908QY4 and MC68HC908QT4 — 4096 bytes

– MC68HC908QY2, MC68HC908QY1, MC68HC908QT2, and

MC68HC908QT1 — 1536 bytes

• 128 bytes of on-chip random-access memory (RAM)

• 2-channel, 16-bit timer interface module (TIM)

• 4-channel, 8-bit analog-to-digital converter (ADC) on MC68HC908QY2,

MC68HC908QY4, MC68HC908QT2, and MC68HC908QT4

• 5 or 13 bidirectional input/output (I/O) lines and one input only:

– High current sink/source capability on all port pins

– Selectable pullups on all ports, selectable on an individual bit basis

• 6-bit keyboard interrupt with wakeup feature (KBI)

• Low-voltage inhibit (LVI) module features software selectable trip point

in CONFIG register

• System protection features:

– Computer operating properly (COP) watchdog

– Low-voltage detection with reset

– Illegal opcode detection with reset

– Illegal address detection with reset

• External asynchronous interrupt pin with internal pullup (IRQ) shared

with general-purpose input pin

• Master asynchronous reset pin (RST) shared with general-purpose I/O

pin

• Power-on reset

• Internal pullups on IRQ and RST to reduce external components

• Memory mapped I/O registers

• Power saving stop and wait modes

• MC68HC908QY4, MC68HC908QY2, and MC68HC908QY1 are

available in these packages:

– 16-pin plastic dual in-line package (PDIP)

– 16-pin small outline integrated circuit (SOIC) package

– 16-pin thin shrink small outline package (TSSOP)

• MC68HC908QT4, MC68HC908QT2, and MC68HC908QT1 are

available in these packages:

– 8-pin PDIP

– 8-pin SOIC

– 8-pin dual flat no lead (DFN)

MC68HC908QT1属于集成电路（IC） > 微控制器。恩智浦半导体公司制造生产的MC68HC908QT1微控制器微控制器产品是相对复杂的用户可编程数字逻辑器件。这些产品与视为微控制器的器件密切相关，两者之间的区别主要体现在制造商选择的用词。不过按照传统，微控制器集成了工作存储器，也更可能包含混合信号外设，并且往往与更简单的软件范例结合使用，旨在重复执行一系列预定义的任务。