MC68HC705MC4MDW中文资料恩XP数据手册PDF规格书

特性 Features

Features of the MC68HC705MC4 are listed below. Note that all timing is

based on a 3-MHz bus.

• Low-Cost, HC05 Core Running at 3-MHz Bus Speed at VDD = 5 V

± 10

• 28-Pin Plastic Dual In-Line Package (PDIP), Small Outline

Integrated Circuit (SOIC), or Windowed Ceramic Package with

Low Electromagnetic Interference (EMI) Emission Pinout

• 3584 Bytes of User EPROM, Including Eight User Vectors of Two

Bytes Each

• 176 Bytes of User RAM

• Dual-Channel, High-Speed PWM, Featuring:

– 8-Bit Duty Cycle Resolution

– Independent Prescaler Frequency Selection and Period

Counters

– Two Frequency Ranges, Eight Steps in Each:

183 Hz to 23.4 kHz

122 Hz to 15.6 kHz

– Software Programmable PWM Polarity

– Dual Software Controllable PWM Output Multiplexer, Each

PWM to Three Input/Output (I/O)

• 8-Bit A/D Converter with Six Input Multiplexer

– High and Low References

– Conversion Rate = 10.7 ms

• 16-Bit Timer with Two Input Captures or One Input Capture Plus

One Output Compare

– Resolution = 1.33 ms

– Input Capture Active Edge Software Selectable as Rising or

Falling

• 15-Stage, Multi-Function Core Timer with Timer Overflow,

Real-Time Interrupt, and Watchdog

• Asynchronous Serial Communications Interface (SCI)

• 22 General-Purpose I/O Lines, Some Shared with Peripheral

Functions

• One 8-Bit High Source Current I/O Port

– 10 mA/Pin

– 20 mA Maximum/Port

– Port A

• One High-Sink Current 10 mA Output Pin, PB7

• Mask, Request, Acknowledge, Edge and Sensitivity (Edge- and

Level-Sensitive or Edge-Sensitive Only) Control/Status Bits for

IRQ Interrupt

• On-Chip Oscillator for Crystal/Ceramic Resonator

• Mask Selectable Computer Operating Properly (COP) Watchdog

System

• Illegal Address Reset

• Steering Diode on RESET Pin to VDD