MC44BS373CAD中文资料摩托罗拉数据手册PDF规格书

The MC44BS373CA audio and video modulator is for use in VCRs, set-top boxes, and similar devices.

• Supports multiple standards

• TV output level 82 dBµV typical

• 5- and 3.3-V compatible I2C bus

特性 Features

The MC44BS373CA also has the following features:

• Integrated on-chip programmable UHF oscillator

• No external varicaps diodes/inductor or tuned components

• Extremely low external component count

• Channel 21–69 UHF operation

• VHF range possible by internal dividers (30–450 MHz)

• Boosted TVOUT level (82 dBµV typical)

• High-speed read and write I2C bus compatible (800 kHz)

• I2C address selectable by pin (four choices) using external resistor (available only in QFN20 package)

• I2C bus 5- and 3.3-V compatible

• Fixed video modulation depth (93 typical in system L and 82 typical in the other standards)

• Peak white clip disabled by bus

• Programmable picture/sound carrier ratio (12 and 16 dB)

• Integrated on-chip programmable sound subcarrier oscillator (4.5, 5.5, 6.0 and 6.5 MHz)—no external varicaps

• Programmable sound reference frequency (31.25 and 62.5 kHz)

• Direct RF sound modulator input (FM and AM modulator bypassed) for NICAM or stereo sound applications (available only in QFN20 package)

• On-chip video test pattern generator with sound test signal (1 kHz)

• Low-power programmable modulator standby mode

• Transient output inhibit during PLL lock-up at power-on

• Logical output port controlled by bus

• ESD protection, minimum 4 KV