MC44BC373C中文资料Multi-Standard Audio/Video Modulator数据手册恩XP规格书

描述 Description

Overview The MC44BC373C is a Multi-Standard, Phase-Locked Loop (PLL) tuned, Ultra High Frequency (UHF) and Very High Frequency (VHF), audio/video (A/V), high integration modulator, integrated circuit (IC). It is intended for use in VCRs, Games, and Set-Top box systems. The MC44BC373C is compatible with the following formats:PAL—Phase Alternation Line (European TV format) SECAM—Sequential Color and Memory (French Color TV Standard) NTSC—National Television System Committee An on-chip high-speed I2C compatible bus receiver sets the channel. It is tuned by a PLL over the full range of the UHF bands. The modulator incorporates a sound subcarrier oscillator and uses a second PLL to derive 4.5, 5.5, 6.0, and 6.5MHz subcarrier frequencies, which are selectable using the bus. The modulation standard is chosen using a control bit that selects between System L and System B/G. The picture-to-sound ratio may be adjusted using the bus. In addition, an on-chip video test pattern gener-ator can be switched ON with a 1KHz audio test signal. The MC44BC373C is available in a 16-pin (SO16NB) package.

特性 Features

•No external varicaps diodes/ inductor or tuned components
•Channel 21-69 UHF operation
•VHF range possible by internal dividers (30MHz–450MHz)
•Integrated on-chip programmable UHF oscillator
•Extremely low external components count
•High speed read and write I2C-bus compatible (800kHz)
•Fixed video modulation depth (80% in PAL and 90% in SECAM)
•Peak White Clip disabled via the bus
•Programmable picture/sound carrier ratio (12dB and 16dB)
•Integrated on-chip programmable sound subcarrier oscillator (4.5MHz to 6.5MHz) — No external vari-caps
•On-chip video test pattern generator with sound test signal (1kHz)
•Low-power programmable modulator standby mode (booster active)
•Transient output inhibit during PLL Lock-up at power-ON
•Logical Output Port controlled by bus
•Custom masked versions with unique start-up settings possible (no I2C bus programming required)
•Extremely robust ESD protection, minimum 4kV, typical 6kV